-
Posts
2,610 -
Joined
-
Last visited
-
Days Won
135
Content Type
Profiles
Forums
Downloads
Posts posted by retird
-
-
-
3 hours ago, str8.drippin said:
Ooo! That's a great idea, I might try that. Thank you! Before I disassemble it, do you know of any videos showing that process? Have looked for one but can't find anything.
If there are any videos I have not seen them...
-
Would it help to just take out the hose and reverse it and reinstall?
- 2
-
Search the forum for VTC6 and find the csv you want to use.... surely there is a csv for single battery....
- 1
-
-
See page starting with "Installing the screen".....
https://downloads.evolvapor.com/dna250color.pdf
It starts out like this:
Installing the Screen
The TFT screen connects to the DNA 250C using an 8 pin ZIF socket and a flexible cable to allow for design flexibility. The cable can be bent or folded (once) but care should be taken to not apply tension or strain to the area where the cable attaches to the screen itself. Once the screen is mounted the cable should be tucked up under the screen and not out towards the fire button. Positioning the cable near the fire button can allow the mods fire button to contact the cable when pressed which will cause eventual screen failure. Only insert or remove the screen before the board is powered on.
- 1
-
If you don't get it here you might contact VA and ask them for it..... link.....
https://viciousantonline.com/contact-us/
-
3 hours ago, Bombastinator said:
The vtx200 squonk actually uses the dna250C board. So I’ve got the right part. My problem is getting the drone250c apart so I can replace it. That’s the bit I don’t know how to do.
OK..... you might google "Lost Vapes Drone 250C disassembly video" I've seen disassembly videos of other drones (maybe one of those could be helpful.....
-
I don't think a DNA200 screen will work on the 250C...... here is a link to the 250C replacement screen.....
-
Start a ticket with Evolv.... link in my sig line below
-
Since you just purchased it and had it only a few days you might contact the vendor to see about getting a replacement under their warranty.
-
What happens when you only plug in the usb cable with no device connected? Is this a Windows computer? Have you tried a different usb cable?
-
Can you post a picture of the board/wiring? Also have you tried a different atomizer?
-
The Plus requires SP20
-
-
Nothing in your video.....
Did you follow the 2s Wiring diagram and bridge properly? Battery set to 2-cell in Escribe?
https://downloads.evolvapor.com/dna250color.pdf
How about a picture of the wiring on the board and battery holder?
-
Can you save the .ecig file to your computer and post that file here? Are you using the same Theme on both devices?
-
Just now, Lanzarotechris said:
No hornets nest here..... the thread was always active but few can participate as they aren't users of Linux.... 😀
-
If you all still want to communicate with @James about Linux you might try asking by starting a ticket with Evolv Help Desk....there are few, few Linux folks around here.... @James is your go-to guy at Evolv... ask that your ticket comments be given to @James....
https://helpdesk.evolvapor.com/index.php?a=add&category=1
-
Also.....
Too Hot: The DNA 75C has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.
-
22 minutes ago, Keegan95 said:
Everywhere is sold out. I didn’t know if maybe there was a different site that everyone got from is all
The very first vendor linked on the google searched page says this if you try to buy look at the color selections as some colors are not sold out......... https://www.elementvape.com/vapecige-vtbox-dna250c-200w-box-mod and this https://www.elementvape.com/think-vape-finder-dna250c-300w-box-mod and this https://www.elementvape.com/lost-vape-drone-bf-squonk-dna250c-tc-mod
I didn't check all the other vendors... good luck....
-
As posted in the other thread you asked this question.... multiple posts are not necessary and can confuse...
- 1
-
-
After defining your profile did you upload it to the device?
DNA250C resistance issues
in General Discussion
Posted
Do you dry burn your coils and are they contact coils or spaced? What wire are you using?