Jump to content
Evolv DNA Forum

retird

Moderators
 View Profile  See their activity

  • Posts

    2,610

  • Joined

  • Last visited

  • Days Won

    135

 Content Type 

Posts posted by retird

  3. DNA 250c issue

    in General Discussion

    Posted

    After putting in the batteries what happens when you press the down button and then the up button? If that moves the choice between yes and no (new/old, etc depending on the theme you have) then just select (middle button) your choice. If you are only changing batteries while using the device then you probably don't need to select "new coil".

  7. 250 DNA does not work

    in Modders' Forum

    Posted

    Seeing Check Battery message.  Take out the batteries and check the voltage of each battery with a meter.  What is the voltage of each?  

    Have you got another set of batteries to try?   

    When batteries get too low they will not charge inside the device.  

    Any more information you can give?

  15. TFV16

    in Replay and Atomizers

    Posted

    1 hour ago, zark said:

     

    @ Vitalii contacted me by phone.   His problem is that the  CLAPTON SS316 + Kanthal coil works fine in TC mode, and Save puff is not activated when switching to Replay. In this case, the mod does not give error messages.

    If Replay is not activated then the DNA is not recognizing the coil as a material that is supported by Replay (assuming Replay is selected in the settings of the profile @Vitalii is using).  Probably has something to do with the coil build with Kanthal is my guess...  not really much information provided to further discuss...  

    • Thanks 1

  16. TFV16

    in Replay and Atomizers

    Posted

    So, replay doesn't work with the single coil using the TFV16  but only give you the option to play.  Do any of the coils (single, double, or triple) work in straight Temperature Control mode using the TFV16 tank?  

    There are some tanks that use pre-made coils that don't work with TC or Replay because of several reasons.  Tank design, coil connection points to the coil shell, and coils that are not truly Nickel, Titanium, etc.

    I don't have a TFV16 but my guess is that either the tank or the pre-made coils is not compatible with replay (assuming the coils don't work in straight Temperature Control mode).  

    SMOK may have answers for you. Also, you could start a ticket with Evolv and explain to them and see what they say...  https://helpdesk.evolvapor.com/index.php?a=add&category=1

    SMOK says the mesh coils are Nickel-Chrome.......  This may help......    https://spinfuel.com/ni200-and-ni-chrome-a-brief-look/       and a short clip from that link is:  Ni-Chrome isn’t a wire used for Temperature Control, though many vapers mistakenly thought so. If you build your own coils you should buy pure nickel, or Ni200, for many reasons.

     

    • Like 1

  19. **** Evolv

    in General Discussion

    Posted

    Looks like you have many options.... at this point it is unclear what the issue with the device really is.   To say it is definitely a sketchy chip is a stretch at this point I think.  It may even be poor assembly.  You can google that mod here in this forum and see if there are any posts to read that other owners may have posted and had issues with the mod discussed here ......

    Efun Warranty.....   https://www.efun.top/warranty-policy

    Efun Customer service (with e-mail addresses) ....  https://www.efun.top/customer-service    I  sent two e-mails  to them and the e-mails went thru using  Windown 10 and Chrome ...... used Yahoo mail... and sent a second e-mail from another e-mail provider I use......

    Evolv Warranty:....  https://www.evolvapor.com/warranty

    Start Ticket with Evolv:  https://helpdesk.evolvapor.com/index.php?a=add&category=1

    You probably have looked at all these links already but I'm posting them so you and others who may come here will have them in one place...

     

    I would like to respond to many of your negative comments but that serves no positive purpose as we are volunteers just trying to help.

  20. **** Evolv

    in General Discussion

    Posted

    hum, you have several options to get this resolved.  The easiest (and probably the best) is to start a ticket with Evolv.  Their warranty plainly states you are responsible for shipping to them. As you stated earlier they even replaced a board for you that was out of warranty.  

    There is a process with PayPal  (Dispute and Claims processes) which could result in a full refund or replacement if that is your preference. 

    China resolution is not clear at this point. (opening the device may void any warranty you have with China vendor).

    The guys here are trying to help you out.  The choice is yours.  Good Luck.....  

  21. **** Evolv

    in General Discussion

    Posted

    Could be something not connected properly in the battery tray, the batteries, maybe something with the mod wiring going to the board, or maybe something with the board.... Since it was DOA from China you might see if they will replace it.  You also could start a ticket with Evolv.  

    To reset device with Escribe go to: Tools/Diagnostics/Reboot Device/Click on your choice of soft or hard reboot

    If you don't have the reset choices go to : Options/User Interface and set it to Manufacturer and you should then have reset ability.   

  23. Check atomizer

    in General Discussion

    Posted

    3 hours ago, shehabismail said:

    It should work even if its contact, my new Vaporesso GEN Works fine with the same build. Also it should work if the wire has SS or any other temp control material...

    Many, many posts here about contact coils and DNA technology....  I offer a suggestion to try a spaced coil as many have found this solves their issues.... Good luck...

×
×
  • Create New...