Romantic Posted July 15, 2017 Report Share Posted July 15, 2017 My mood therion DNA 133 does't work i need I c management how can I get it? Link to comment Share on other sites More sharing options...
Wayneo Posted July 15, 2017 Report Share Posted July 15, 2017 About 'management'. If you want 'mod' escribe software https://forum.evolvapor.com/topic/66731-early-firmware-and-escribe-suite/ If you want official Evolv Technical support/Help Desk https://helpdesk.evolvapor.com/?a=add Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted July 15, 2017 Report Share Posted July 15, 2017 you want the analog front end IC? this is the IC - http://www.ti.com/product/BQ76925 - bq76925 VQFN (24) 6.50 mm × 4.40 mm mouser or digikey will most likely have them in stock...... you will need a hot air station to replace and SMD rework experience, not easy to reflow without proper heat shielding protecting other nearby board components from burning/melting FYI. why not just RMA the board to Evolv for replacement @Romantic? 2 Link to comment Share on other sites More sharing options...
Sovan Posted February 26, 2018 Report Share Posted February 26, 2018 @ChunkyButt200 It's not the Power management IC under the the USB port , right ? Link to comment Share on other sites More sharing options...
Sovan Posted February 26, 2018 Report Share Posted February 26, 2018 @dwcraig1 yeah I meant this IC but I believe its not the same one on the link he posted Link to comment Share on other sites More sharing options...
dwcraig1 Posted February 26, 2018 Report Share Posted February 26, 2018 Scroll to part 6 http://www.ti.com/product/BQ76925/datasheet/abstract#SLUSAM91134 Link to comment Share on other sites More sharing options...
Sovan Posted February 26, 2018 Report Share Posted February 26, 2018 (edited) 48 minutes ago, dwcraig1 said: Scroll to part 6 http://www.ti.com/product/BQ76925/datasheet/abstract#SLUSAM91134 aha I see! but from the link picture it was showing only 6 pin thats why i got confused , which one is correct 3rd or 4th ? Edited February 26, 2018 by Sovan edit Link to comment Share on other sites More sharing options...
dwcraig1 Posted February 26, 2018 Report Share Posted February 26, 2018 Don't feel bad, I'm confused as well. Perhaps ChunkyButt200 will chime in. 1 Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted February 26, 2018 Report Share Posted February 26, 2018 First off, @Sovan you know Evolv warranties the board for 1 year. Even after one year it is still worth sending them an email about your situation. You never know, they might still help you out. The only reason i posted the link for the analog front end IC is for people who have experience with Hot Air Re-work stations and have a good understanding of soldering SMD components. This IC replacement is not for the average person who owns a soldering iron. I have experience re-flowing small BGA and QFN packaged IC's. RGE Package 24-Pin QFN With Thermal Pad 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now