JohnHaley Posted May 22, 2017 Report Share Posted May 22, 2017 Hello ! My screen replacement just arrived, but I honestly have no idea where to begin and I can't find any guide online pertaining specifically to VTBox 250 by VapeCige. The screen is the large replacement you can order from evolvapor itself (https://www.evolvapor.com/products/dna250) Does anybody have any related experience or can guide me in the right direction? Thanks! Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted May 23, 2017 Report Share Posted May 23, 2017 you'll need to remove the doors (unscrew) and disconnecting the lipo is important before removing the board. there are only 3 phillips head screws that hold in the board. once out (or semi-out, the 510 wires might be soldered) you can follow the DNA 200/250 datasheet for replacing the screen. (available from evolv's website). it isn't that hard, just take your time, don't lose any parts, screws or buttons, make sure ribbon connector is fully/firmly seated inside ZIF connector on board. take note of how the old screen ribbon is bent (make sure ribbon does not get pinched by fire button when re-installing board). you should do just fine. this is how ZIF latch opens and closes. don't go all HULK on it. it's very thin plastic and WILL break if abused. 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 23, 2017 Report Share Posted May 23, 2017 One of the 3 board screws is accessed through the hole for the fire button. The small ring around the button unscrews allowing the button to be removed to get to it. 1 Link to comment Share on other sites More sharing options...
JohnHaley Posted May 23, 2017 Author Report Share Posted May 23, 2017 Thanks, guys, I'll get to it and follow your suggestions. Fingers crossed Link to comment Share on other sites More sharing options...
tony zito Posted July 5, 2017 Report Share Posted July 5, 2017 any fix for a broken zif connector? Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 5, 2017 Report Share Posted July 5, 2017 Open a ticket with Evolv would be my best guess. Link to comment Share on other sites More sharing options...
tony zito Posted July 5, 2017 Report Share Posted July 5, 2017 really?! how would I go about doing that? I just figured I was screwed/doomed, Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 5, 2017 Report Share Posted July 5, 2017 https://helpdesk.evolvapor.com/index.php?a=add&category=1 Link to comment Share on other sites More sharing options...
tony zito Posted July 5, 2017 Report Share Posted July 5, 2017 I submitted a ticket, and am awaiting a response I hope they will take care of me on this one. I was even being really gentile with it 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now