Jalcide Posted December 7, 2015 Author Report Share Posted December 7, 2015 This humble Padawn is curious to learn of your advanced Jedi vaping tools and skills, so that I may learn.In in the meantime, I'll be limping along with my Rocket Science Mods, RocketR, CloudDeck Edition genesis atomizer with custom dual airholes (after a long discussion with the machinist about the perfect draw) and massive, 3mm mesh wick hole capable of high VG (in a genny!), if desired.With a .1 ohm, 28 guage ni200, 3mm vertical coil with "rose pedal" curled 200 grade 317L SS mesh inside.Flavor and vapor production is incredible. Wicking so good, the "genny tilt" is not required.Not a single dry hit nor hotspot (due to Ni200's low resistance around the mesh) and TC allows full control over the flavor/vapor. Works great on my DNA40 Hana Mods and DNA 200s.The only arguing that's happened in my local vape shop, about my set up, has been regarding the duration it's been in my hands and not theirs. I literally had the vape shop's resident guru demand that I "hand it over" so that he could enjoy it for a while.That was good enough for me, reaching a respectable flavor-chasing status within my local circle.But I'm always interested to learn something new. So please do share what your favorite setup is.*gets popcorn* Link to comment Share on other sites More sharing options...
black lace Posted December 7, 2015 Report Share Posted December 7, 2015 Yer kenthal faze and not being sure about anything didnt last long then did it.. Right this minute a goblin mini with twin tiger coils at .30 ohm 30 watt dropping to 25 watt depending on how many draws a minute regarding heat and flow, using the preset function on the dna 200 on my own company brand 80vg 3mg custard cream juice. Later i may vape on a kayfun russian custom .11 ohm suicide bunny original blend 450f 12 watt. So prety much standard rule of thumb vaping, nothing off the planet. Nothing ta get big headed and cockey about. Link to comment Share on other sites More sharing options...
VapingBad Posted December 7, 2015 Report Share Posted December 7, 2015 1st rule of vape club: Whatever works for you (or them) is the right solution.Clouds, flavour, watts, ohms, temp, PG:VG, cotton, rayon, genesis, kanthal, titanium, stainless steel are just details. Link to comment Share on other sites More sharing options...
Jalcide Posted December 7, 2015 Author Report Share Posted December 7, 2015 black lace said:Yer kenthal faz didnt last long then did it..Well, my heart belongs to my genny, but I'm a vapa' playa and will be all up on another atty when she's not looking. Link to comment Share on other sites More sharing options...
VapingBad Posted December 7, 2015 Report Share Posted December 7, 2015 Love my gennies, but I love flavour and I don't tell drippers they have it all wrong. Link to comment Share on other sites More sharing options...
Jalcide Posted December 7, 2015 Author Report Share Posted December 7, 2015 VapingBad said:Love my gennies, but I love flavour and I don't tell drippers they have it all wrong.Much love for dripping, here.I've got a small, dual clapton build on a Vulcan that I can't put away. Link to comment Share on other sites More sharing options...
Jalcide Posted December 8, 2015 Author Report Share Posted December 8, 2015 black lace said:Right this minute a goblin mini with twin tiger coils at .30 ohm 30 watt dropping to 25 watt depending on how many draws a minute regarding heat and flow, using the preset function on the dna 200 on my own company brand 80vg 3mg custard cream juice. Later i may vape on a kayfun russian custom .11 ohm suicide bunny original blend 450f 12 watt. So prety much standard rule of thumb vaping, nothing off the planet.Nice! Love my Goblin Mini (and the original Goblin, too).I have the Kayfun Russian, but have not really figured it out yet. I'm trying to get into MTL and just ordered a custom topcap for my RocketR to that end. Need to revisit the Russian.Big fan of Suicide Bunny OB, too. That stuff is so good. Link to comment Share on other sites More sharing options...
black lace Posted December 8, 2015 Report Share Posted December 8, 2015 >quote I have the Kayfun Russian, but have not really figured it out yet. Thank you ..finaly .. lamo Link to comment Share on other sites More sharing options...
Jalcide Posted December 8, 2015 Author Report Share Posted December 8, 2015 black lace said:>quote I have the Kayfun Russian, but have not really figured it out yet. Thank you ..finaly .. lamoIt's not so much the RTA build, itself, I haven't figured out, but my own mouth parts and breath control. Mouth-to-lung is an art form I haven't mastered."Circular breathing," doubly so.black lace said:TwatUpdate: Regarding this useful "contribution" to the discussion, I refuse to "bump" this, now, completely hijacked and ruined thread, with a reply.I think the discussion I was trying to have, has reached its natural conclusion anyway, so no loss.If you're still monitoring this thread, you can put the popcorn away -- after this last, popcorn-worthy edit, of course. Link to comment Share on other sites More sharing options...
black lace Posted December 8, 2015 Report Share Posted December 8, 2015 Twat Link to comment Share on other sites More sharing options...
lewisss Posted December 9, 2015 Report Share Posted December 9, 2015 Sits down, gets comfortable! Link to comment Share on other sites More sharing options...
black lace Posted December 9, 2015 Report Share Posted December 9, 2015 What like " whos next" or quote brad pitt in the film troy "is there no one els" is there no one else" Link to comment Share on other sites More sharing options...
black lace Posted December 9, 2015 Report Share Posted December 9, 2015 Jalcide said:[QUOTE=black lace]>quote I have the Kayfun Russian, but have not really figured it out yet. Thank you ..finaly .. lamoIt's not so much the RTA build, itself, I haven't figured out, but my own mouth parts and breath control. Mouth-to-lung is an art form I haven't mastered."Circular breathing," doubly so.black lace said:TwatUpdate: Regarding this useful "contribution" to the discussion, I refuse to "bump" this, now, completely hijacked and ruined thread, with a reply.I think the discussion I was trying to have, has reached its natural conclusion anyway, so no loss.If you're still monitoring this thread, you can put the popcorn away -- after this last, popcorn-worthy edit, of course. [/QUOTE] we aim to please...................... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now