WastedVapes Posted January 11, 2016 Author Report Share Posted January 11, 2016 It worked for a while, long enough where the guy I got it from wont warranty it no more. It will no longer connect to the computer. Here is a video so you can see my Dilemma. Hopefully someone can help. Video - https://www.youtube.com/watch?v=t_QCjAe3ack Link to comment Share on other sites More sharing options...
retird Posted January 11, 2016 Report Share Posted January 11, 2016 Have you tried reloading the Efusion settings?From Lostvapes web site: Download the official Evolv Escribe Lost Vape Efusion Settings Here. This file contains the complete results of the Battery Test, Mod Resistance Offset, and Case Analyzer settings. Also included are Titanium and 316 Stainless Steel Heating Element Profiles. Please ensure that EScribe is updated to the latest version prior to using this profile. Link to comment Share on other sites More sharing options...
WastedVapes Posted January 11, 2016 Author Report Share Posted January 11, 2016 I cant even get the mod connected to the escribe software Link to comment Share on other sites More sharing options...
retird Posted January 11, 2016 Report Share Posted January 11, 2016 Have you tried forcing a firmware update?Downloard Efusion settings from the link I gave in an earlier post to your computer.In EScribe Go to Tools/Update firmware. Link to comment Share on other sites More sharing options...
lewisss Posted January 11, 2016 Report Share Posted January 11, 2016 Try using a different usb lead and maybe some decent music would help! Link to comment Share on other sites More sharing options...
WastedVapes Posted January 11, 2016 Author Report Share Posted January 11, 2016 It still wont connect and every once in a while it will say power surge... Iv tried switching cords and music too!!!! Link to comment Share on other sites More sharing options...
retird Posted January 11, 2016 Report Share Posted January 11, 2016 So you could not force a firmware update? Link to comment Share on other sites More sharing options...
WastedVapes Posted January 11, 2016 Author Report Share Posted January 11, 2016 It keeps saying to connect a device Link to comment Share on other sites More sharing options...
retird Posted January 12, 2016 Report Share Posted January 12, 2016 You might try forcing an update again and when it says connect a device just keep clicking ok 4 or 5 times while you wiggle the cable at the usb. Be sure the USB cable is capable of data transfer and not just a charge cable. I have a usb cable for my cell phone that transfers data but not to my dna200. Not all cables will work.If you can disconnect the battery you could try a forced update with the battery out of the circuit. If you can't force an update then you might just RMA it to Evolv. Link to comment Share on other sites More sharing options...
blueridgedog Posted January 13, 2016 Report Share Posted January 13, 2016 When it is plugged in, what USB devices are seen by your computer? You should be able to get a list in device manager. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now