JJVapes Posted July 18, 2015 Author Report Share Posted July 18, 2015 I just got my board in today. I don't want to break anything getting it on. How did you guys get yours in? Link to comment Share on other sites More sharing options...
macz Posted July 18, 2015 Report Share Posted July 18, 2015 JJVapes said:I just got my board in today. I don't want to break anything getting it on. How did you guys get yours in?Slide the ribbon cable by wiggle it in gently same like I did on DNA40 large screen Link to comment Share on other sites More sharing options...
KTMRider Posted July 18, 2015 Report Share Posted July 18, 2015 I used a wooden toothpick on one of the holes by the contacts to gently push it in. Link to comment Share on other sites More sharing options...
Podunk Steam Posted July 18, 2015 Report Share Posted July 18, 2015 Link to comment Share on other sites More sharing options...
JJVapes Posted July 18, 2015 Author Report Share Posted July 18, 2015 Awesome thanks guys! Link to comment Share on other sites More sharing options...
JJVapes Posted July 24, 2015 Author Report Share Posted July 24, 2015 I tried what you did in the video pod but it doesn't seem to get in deep enough to stick. Does it click into place or give any indication of being secure? Link to comment Share on other sites More sharing options...
VapingBad Posted July 24, 2015 Report Share Posted July 24, 2015 It doesn't stick on it's own, once it is in place gently push the clip down into place to lock it (the opposite direction to the arrow in the picture). Link to comment Share on other sites More sharing options...
JJVapes Posted July 24, 2015 Author Report Share Posted July 24, 2015 I saw that and I was gently trying to pop it but I was worried about breaking it. Thanks Link to comment Share on other sites More sharing options...
rask116@hotmail.com<rask1 Posted January 24, 2016 Report Share Posted January 24, 2016 What do you do if you broke the clip? The cable of the screen seems to still be in place, as it does work, however the little clip that is suppose to lock it in place, I somehow broke. And I was trying to be very careful when I removed the board out of my diy mod (had to remove the board to put in a bigger battery and solder longer + an - leads to the board) . Is there some sort of anything I can use to keep it secured into place so it won't come out? Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted January 24, 2016 Report Share Posted January 24, 2016 rask116@hotmail.com<rask1 said:What do you do if you broke the clip? The cable of the screen seems to still be in place, as it does work, however the little clip that is suppose to lock it in place, I somehow broke. And I was trying to be very careful when I removed the board out of my diy mod (had to remove the board to put in a bigger battery and solder longer + an - leads to the board) . Is there some sort of anything I can use to keep it secured into place so it won't come out?your best bet is open a ticket with evolv and RMA the board. if for some reason that's out of the question or shipping is too expensive, you could try some sort of tape or a putty that will harden over the zif socket to keep the ribbon from moving/pulling out. or maybe somehow secure the ribbon with a good tape at the base of the ribbon right where it meets the zif socket. just know if you use a glue product you're most likely not going to be able to change the screen if something happens to this one.keep in mind, the zif socket latch not only holds it place, it's also responsible for making a solid connection from socket to cable.maybe someone who had this happen to them could add some info on what they used as fix. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now