BillW50 Posted April 8, 2016 Report Posted April 8, 2016 You just put on another atty and that happened? If so, Evolv should cover that. And why in your second pic, looks like there is a second board under the DNA200?
BillW50 Posted April 8, 2016 Report Posted April 8, 2016 It should be covered by Evolv's one year warranty.
BillW50 Posted April 8, 2016 Report Posted April 8, 2016 I don't know what their hours are, but it isn't 9AM there yet and they are probably not even open. Plus they probably have to answer email they got last night too.
Spector NS5 RD Posted April 9, 2016 Report Posted April 9, 2016 webe24 said:I 've sent an email but no replyit could take a few days but they will reply to your ticket. just don't send them more than one email. they said it will take longer for a response if you start blowing up their inbox.
triakis Posted April 9, 2016 Report Posted April 9, 2016 At least yours let out the magic smoke!My Tuglyfe just shut off, quit with no noise, nothing.Plug in USB, it lights up, can see with Escribe, etc.Battery is 98% charged too. Dies immediately when unplugged.Checked the fuse and it's not that.Sudden death syndrome LOL.I picked up a Wisnec which looks like the OP's mod. Hope it doesn't do that!In the meantime, got my trusty Rig V2 Roughneck and a box of LG HG2s keeping things rolling...
black lace Posted April 10, 2016 Report Posted April 10, 2016 The second shot in the op, you can see some kind of spillage running out the two airholes,,, back to basics, if you leave a mod liying on its side or rattling around in the bottom of a bag, the tank atomiser will leak its contents, also, allways switch the mod off, standard five clicks, lipo batteries can be volatile if not looked after properly. dont stuff the mod into storage where somthing can press the buttons.
BillW50 Posted April 10, 2016 Report Posted April 10, 2016 black lace said:also, allways switch the mod off, standard five clicks...You mean lock, right? As the DNA200 doesn't turn off unless you disconnect the battery.
black lace Posted April 10, 2016 Report Posted April 10, 2016 Yeh..... ness ya get juice all over its inards and burn it out .. lol..
Spector NS5 RD Posted April 10, 2016 Report Posted April 10, 2016 i'm not saying that isn't juice in two of the three vent holes in OP's pic, but if you have ever noticed what is left behind after a component self destructs such as a mosfet or a hefty diode, it pretty much looks like that. black shiny enamel crust. i have seen many a circuit board that resembled OP's relo's innards. just my two cents, shillings, and pence. either way it sux.
black lace Posted April 10, 2016 Report Posted April 10, 2016 Yes fair comment we can all only bring our individual experiance in.. i havent had the pic up on computer screen but can see on my mobile, that board realy has got hot, the solder looks like its flowed.
Guest Posted April 15, 2016 Report Posted April 15, 2016 webe24 said:I 've sent an email but no reply I had a board fail opened a clame ticket had new board no problems mailed to me best service I have ever experienced. Opus DNA 200 from failure to up and working in under a week . That was three months ago .I really like my Opus DNA 200 and my friend like his
black lace Posted April 15, 2016 Report Posted April 15, 2016 They have been very good to me in the past allthough living half way around the world, things can take a few weeks, also comunicating over tibkets, are or last time i heard it was "give us 48 hours to get back to you"
Addicted2Glock Posted May 6, 2016 Report Posted May 6, 2016 triakis said:At least yours let out the magic smoke!My Tuglyfe just shut off, quit with no noise, nothing.Plug in USB, it lights up, can see with Escribe, etc.Battery is 98% charged too. Dies immediately when unplugged.Checked the fuse and it's not that.Sudden death syndrome LOL.I picked up a Wisnec which looks like the OP's mod. Hope it doesn't do that!In the meantime, got my trusty Rig V2 Roughneck and a box of LG HG2s keeping things rolling...Mine to, I just replace the fuse and it works again
jurdanas Posted May 7, 2016 Report Posted May 7, 2016 Hello.2016.05.04 my "DNA200" died. In the morning when pressing "fire" button - on the screen "LOGO" for one second. After has gone off the screen, but " mod" work (FIRE) full power. I don't pushing "fire" button but "DNA200" continued to work (FIRE) without stopping. Stop work only when unmount batteries. My "atom" (atomyzer) burned completely (it was hot and has a bad smell), mouth burns, it hurts.I experience great stress.I understand - EVERYTHING HAPPENS, but bomb in the hands - it's too much.Now DNA200 - screen educate inscription "Warranty Service" error message (don't work, died).I make recovery - don't help.DNA200 I buy 2015.08.26 and she 2016.05.04 died.I write ticket EVOLV, but don't have answer.I'm angry, incredible.REGARDS
dwcraig1 Posted May 7, 2016 Report Posted May 7, 2016 Might I ask what firmware version that you were using?
jurdanas Posted May 7, 2016 Report Posted May 7, 2016 dwcraig1 said:Might I ask what firmware version that you were using?This will help? please...autofire https://forum.evolvapor.com/topic/66938-topic/Program is (1000001111001101010000.......) and no one else.Another matter of poor electrical components.
black lace Posted May 7, 2016 Report Posted May 7, 2016 Can you take some pictures and put them up you will.
jurdanas Posted May 7, 2016 Report Posted May 7, 2016 All photos send to the EVOLV "ticket". Now I don't want anything (This is a lesson for me)
black lace Posted May 7, 2016 Report Posted May 7, 2016 ok, if you change your mind we are all hear and are keen to help you, and keep you off the smokers.........
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now