ryanflynn997 Posted April 29, 2016 Report Share Posted April 29, 2016 Right! At least its simple but its about a 5 minute job Link to comment Share on other sites More sharing options...
black lace Posted April 29, 2016 Report Share Posted April 29, 2016 it should be able to fire without the screen connected if the fuse hasn't blown!obviously you will have a little difficulty knowing when its unlocked, but connected to escribe you should still be able to set it to an atty and adjust your heat and power..........if you can change your screen you shouldn't have to much difficulty testing the fuse, possibly even replacing the fuse.. Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 29, 2016 Report Share Posted April 29, 2016 True... Where do you buy fuses at? Link to comment Share on other sites More sharing options...
retird Posted April 29, 2016 Report Share Posted April 29, 2016 Just curious.... hook your mod up to EScribe and go to Device Monitor.... What does it say in the lower left hand corner of Device Monitor (where it says "Mode") ? Link to comment Share on other sites More sharing options...
BillW50 Posted April 29, 2016 Report Share Posted April 29, 2016 ryanflynn997 said:no it does not still vape. but what do i do in escribe to see if it's just the screen ? i'm new to the dna200 board since i just got this lavaboxWhile connected to EScribe, under the Themes tab, just pick one of the screens and select Capture. That shows you what is supposed to be on the screen right now. That way you can see what is going on with the DNA200.UPDATE: retird replied while I was typing. That is a good thing to do as well. Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 29, 2016 Report Share Posted April 29, 2016 Thanks guys! But ill have to let you know a little later since I fudged my computer up trying to download escribe. When I wiggle my screen around it works for a split second Link to comment Share on other sites More sharing options...
black lace Posted April 29, 2016 Report Share Posted April 29, 2016 Yes we allready established you need a new screen.. stop wiggling it and replace it, lol.. Link to comment Share on other sites More sharing options...
BillW50 Posted April 29, 2016 Report Share Posted April 29, 2016 ryanflynn997 said:Thanks guys! But ill have to let you know a little later since I fudged my computer up trying to download escribe. When I wiggle my screen around it works for a split secondYou know, that screen ribbon is attached to the board by a ZIF connector. If the latch became just a tad loose or the ribbon somehow got pulled a little, reseating it might clear it up. Although if the ribbon failed because it was being pitched my the fire button... well then you need a new screen. Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 So evolv was going to fix it but its just the screen I hooked it to describe and played with it... Amazing product! I'll fix the screen and keep it thanks everyone for all the suggestions you guys are great Link to comment Share on other sites More sharing options...
retird Posted April 30, 2016 Report Share Posted April 30, 2016 So you hooked it up to EScribe..... what did you find out was shown in Device Monitor under "Mode"? I guess you got it vaping again, right? Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 yep it vapes fine. the fire button is just hard to press and the screen ribbon is junk. i guess ill send it in to evolv... but none the less it works lol Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 I got one last question. What do they charge if I rma my board? I'm going to go that route unless its to much Link to comment Share on other sites More sharing options...
retird Posted April 30, 2016 Report Share Posted April 30, 2016 If covered by warranty there is usually no charge but you pay for shipping old board to them. You never answered my question.... So you hooked it up to EScribe..... what did you find out was shown in Device Monitor under "Mode"? Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 I thought I did. It said normal Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 So if its not covered by a warranty how much would it be? Link to comment Share on other sites More sharing options...
black lace Posted April 30, 2016 Report Share Posted April 30, 2016 You would be buying a new screen or board screen included, ryan can you get the back off and put some pictures up.. Link to comment Share on other sites More sharing options...
ryanflynn997 Posted April 30, 2016 Report Share Posted April 30, 2016 Well the only reason I would send it in is the fire button is hard to press. The screen is an easy fix. And sure what do you want to see pics of? Link to comment Share on other sites More sharing options...
black lace Posted May 4, 2016 Report Share Posted May 4, 2016 I wanted to see if the ribbon was dragging on the button shaft, how have you got on with it anyway? Link to comment Share on other sites More sharing options...
ryanflynn997 Posted May 5, 2016 Report Share Posted May 5, 2016 hey, yeah it was pinching the ribbon from what i could see. and i just went on to escribe and set it to the setting i liked and use it like that... until i get a new screen lol Link to comment Share on other sites More sharing options...
black lace Posted May 5, 2016 Report Share Posted May 5, 2016 Fair play to ya, you dont look at the screen while your vaping anyway... (Ya dont have ta look at the mantle piece while yam poking the fire lol) Link to comment Share on other sites More sharing options...
ryanflynn997 Posted May 6, 2016 Report Share Posted May 6, 2016 Lmao right! Thanks everyone for the help Link to comment Share on other sites More sharing options...
martini3k1 Posted September 20, 2016 Report Share Posted September 20, 2016 I have the same issue and I am completely fed up with evolv and the whole DNA stuff. 3 weeks ago my Lost Vape Duo DNA200 stopped working (says only "Check battery") and yesterday the DNA75 in my Encom "New Beast" only shows a black screen. I am really annoyed that devices which cost 2-3x more than a SMOK box mod are unusable without any reason. Link to comment Share on other sites More sharing options...
retird Posted September 20, 2016 Report Share Posted September 20, 2016 martini3k1 said:I have the same issue and I am completely fed up with evolv and the whole DNA stuff. 3 weeks ago my Lost Vape Duo DNA200 stopped working (says only "Check battery") and yesterday the DNA75 in my Encom "New Beast" only shows a black screen. I am really annoyed that devices which cost 2-3x more than a SMOK box mod are unusable without any reason. Could the Beast be in "stealth" mode? Link to comment Share on other sites More sharing options...
martini3k1 Posted September 20, 2016 Report Share Posted September 20, 2016 Hi, thanks for your reply. Nope, I am 100% sure that it isnt the stealth mode what causes the issue. Link to comment Share on other sites More sharing options...
retird Posted September 20, 2016 Report Share Posted September 20, 2016 Did you try a soft and/or hard boot? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now