AndiVienna91 Posted January 25, 2016 Author Report Share Posted January 25, 2016 Hello community, at first: sorry, my english is very bad, i hope you still know what i mean. I would like it to have an option to show the last temperature and roomtemperature in celsius. At the moment its only possible to show the temperature in celsius.Thanks. Link to comment Share on other sites More sharing options...
daffster Posted January 28, 2016 Report Share Posted January 28, 2016 There should be a celsius / fahrenheit master switch in Escribe... Link to comment Share on other sites More sharing options...
flearider Posted January 28, 2016 Report Share Posted January 28, 2016 why do you want it to display room temp ?it would need an external probe for that ?and how do you mean last temp ? the last it was fired at ? or the last temp it reached ? Link to comment Share on other sites More sharing options...
AndiVienna91 Posted January 28, 2016 Author Report Share Posted January 28, 2016 because in escribe are options to show things like roomtemp and last temp (last temp reached) on the DNA200 display (for example instead of the volts). unfortunateli the DNA200 shows this temps only in Fahrenheit - and so this feature is useless for me. Link to comment Share on other sites More sharing options...
black lace Posted January 29, 2016 Report Share Posted January 29, 2016 On yer mod adjust temp down button,,, keep going down,, it will change to centigrade,,,or verse vicer for faranheight, the last average temp achieved is what your set at in temp mode. There is no need for room temp, the board will be room temp if you unuse the mod for several hours but thats debatable depending on what the enclosure is made of,, are you thinking about temperature and resistance readings.. Link to comment Share on other sites More sharing options...
AndiVienna91 Posted January 29, 2016 Author Report Share Posted January 29, 2016 I know how to set the max temp to celsius. I want to see the LAST REACHED TEMP and ROOMTEMP in celsius. The point is not - do i need to see the roomtemperature - the point is - i want to use this feature. Evolv gave us this feature, so it isnt a big deal to let the user decide fahrenheit or celsius. Link to comment Share on other sites More sharing options...
retird Posted January 29, 2016 Report Share Posted January 29, 2016 Cannot you see room temp, last reached temp in Device Monitor in celsius? Link to comment Share on other sites More sharing options...
AndiVienna91 Posted January 29, 2016 Author Report Share Posted January 29, 2016 No, this Temps are always shown in Fahrenheit. Same as Device-Temperature. I miss an Option to set Fahrenheit or Celsius. Would be really great to have one.1. Device-Temp2. Last reached Temp3. Max Temp Link to comment Share on other sites More sharing options...
retird Posted January 29, 2016 Report Share Posted January 29, 2016 That picture helps. You want to see room and last temperature in celsius ON THE DEVICE SCREEN even tho you can already see it now in Device Monitor. Maybe just a matter of adding a few field options in the screen section of EScribe.Example:Room Temperature CRoom Temperature FLast Temperature CLast Temperature F Link to comment Share on other sites More sharing options...
AndiVienna91 Posted January 29, 2016 Author Report Share Posted January 29, 2016 Yes, that is exactly what i want to say - thank you very much. Link to comment Share on other sites More sharing options...
lathrodectus Posted December 12, 2016 Report Share Posted December 12, 2016 I second this. Why issues about Celcius/fahrenheit still not adressed/resolved? Link to comment Share on other sites More sharing options...
Benny Posted December 24, 2016 Report Share Posted December 24, 2016 I would be very happy too if this option would be add in the next firmware.I think it will take only around 10 minutes and many users will love it! My suggestion... DO it and nobody will ask again. Link to comment Share on other sites More sharing options...
Viller Posted September 14, 2017 Report Share Posted September 14, 2017 (edited) В 29.01.2016 в 20:45, retird сказал: That picture helps. You want to see room and last temperature in celsius ON THE DEVICE SCREEN even tho you can already see it now in Device Monitor. Maybe just a matter of adding a few field options in the screen section of EScribe. Example: Room Temperature C Room Temperature F Last Temperature C Last Temperature F В 24.12.2016 в 13:12, Benny сказал: I would be very happy too if this option would be add in the next firmware. I think it will take only around 10 minutes and many users will love it! My suggestion... DO it and nobody will ask again. Dear Evolv Team ! Why you don't add celsium on device screen ? People ask you for this ! This is not big trouble for your software developers. I don't understand this crappy fahrenheit or something... Edited September 14, 2017 by Viller Link to comment Share on other sites More sharing options...
etab75 Posted September 14, 2017 Report Share Posted September 14, 2017 +1 from me too, lets have °C when charging, I'm surprised its still not been done Link to comment Share on other sites More sharing options...
smalge Posted September 19, 2017 Report Share Posted September 19, 2017 +1! Fahrenheits don't mean a thing to me... Link to comment Share on other sites More sharing options...
Viller Posted September 22, 2017 Report Share Posted September 22, 2017 Guys, do not be shy, bump the topic, that would the representatives of Evolv finally solved our problem! Link to comment Share on other sites More sharing options...
Viller Posted September 26, 2017 Report Share Posted September 26, 2017 Evolv-team, do you read this thread ? Link to comment Share on other sites More sharing options...
retird Posted September 26, 2017 Report Share Posted September 26, 2017 Just FYI.... Evolv has a "Contact Us" feature on their Evolv Web site where you can offer suggestions directly to the staff. It gives you the opportunity to ask for a feature and explain why you think your suggestion has merit. Not all suggestions in the past have been instituted for many and varied reasons but many were also instituted. The hard work of the Evolv folks, the suggestions from others, and the long range goals of Evolv since 2010 have brought us to the current level of technology. I enjoy the "fruits of their labor" each time I vape. Here is a link that you guys can use to offer your suggestions directly to Evolv Staff. https://helpdesk.evolvapor.com/index.php?a=add&category=5 1 Link to comment Share on other sites More sharing options...
smalge Posted September 26, 2017 Report Share Posted September 26, 2017 1 hour ago, retird said: Here is a link that you guys can use to offer your suggestions directly to Evolv Staff. https://helpdesk.evolvapor.com/index.php?a=add&category=5 Done. Thanks! Link to comment Share on other sites More sharing options...
Viller Posted October 2, 2017 Report Share Posted October 2, 2017 В 26.09.2017 в 18:53, retird сказал: Here is a link that you guys can use to offer your suggestions directly to Evolv Staff. https://helpdesk.evolvapor.com/index.php?a=add&category=5 Thank you. Up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now