-
Posts
96 -
Joined
-
Last visited
-
Days Won
18
Content Type
Profiles
Forums
Downloads
File Comments posted by SirTimmyTimbit
-
-
5 hours ago, Vapin said:
You are welcome!
I hate to ask too much of you, but any chance of you fixing the ohm lock in watts on Gauges?
No worries! I'll try to update Gauges tonight with the new screens.
-
59 minutes ago, Vapin said:
Am I correct in thinking that if the 250C version is loaded on the 75C will enable Replay on the 75C?
No it'll give you an error if you try to flash it. Nick is using an unreleased, possibly beta firmware on his DNA75c.
By the way thank you so much for the review man, I really appreciate it
- 1
-
3 hours ago, Vapin said:
I notice while in Watts Mode on the Main Screen, temperature is still visible from using TC , perhaps volts instead.
D'oh it was on the to-do list that went past me. Thanks for bringing it up!
3 hours ago, Vapin said:Also in Atomizer the ability to lock ohm is present while in Watts, in my opinion that should not be, lock ohm should be used only in TC.
That's a fantastic idea! Thanks!
Will change both of those things in 1.0.2 tonight.
Edit: Pushed 1.0.2 that incorporates those changes. Thank you so much for the idea Vapin!
-
1 hour ago, Nick said:
I love this. Little hard to tell when replay is highlighted before enabling it but this is excellent. Great work.
Just pushed 1.0.1. It should be easier to tell now when the button is highlighted.
-
10 minutes ago, Nick said:
Ah that makes sense. I'm using the 250C version on a 75C now for the replay support so the compatibility is good so far. Do you have interface design experience?
Nice an unreleased firmware I'm a web designer/developer so most of my experience is on designing menus and navigation systems. A few times I had to dive deeper into UX/UI design when designing backend interfaces and and for web apps like The Gamer's Post. I quite like designing interfaces
- 1
-
1 minute ago, Nick said:
I love this. Little hard to tell when replay is highlighted before enabling it but this is excellent. Great work.
Thanks man! Highlight color in this theme is a little faint and that doesn't help with images. I left 1px blank space around the replay button but I probably need to leave more.
I don't have a 250c so this didn't get caught testing. I just added an image with an action and tested on the preview panel on the theme designer. You're right it's very hard to notice.
I'll push an update tonight. Thanks for pointing it out!
-
-
15 hours ago, kai0303 said:
Hi Timmy,
first I'd like to thank you for all the work you've put in this fabulous theme and for updating it so fast.
I'm now on v1.3.1, but the problem persists unfortunately. And yes, it seems to happen only on the main screen, when I try being in "Sys Status" the device get's locked as intended (3-5 clicks). I'm new to DNA (two days, to be exact - long time Yihi user here), so I don't have very good knowledge in Theme Designer or Escribe to be of more help. Sorry for that.
But as said before, this is just a little inconvenience someone get's used to.
Thanks man means a lot. I appreciate you putting up with this glitch
It seems like the mod is firing instead of waiting to see if the button press is part of a sequence. I'm not sure what I can do to fix it but I'm definitely looking into it.
I'm going to upload two new themes in a few hours. If you get a chance try them out. If the problems persist in those themes as well, and in no other DNA250 theme it'll be time for me to seek help from Evolv
- 1
-
20 hours ago, Mmartini said:
On the atomizer screen under SS316 I do not see preheat and punch. I see the circle to activate preheat but no text. For punch I see nothing. Is their something I need to do to make these features appear? This is on a DNA75C with theme version 1.2.3
I don't have that problem, and I haven't heard anyone else mention that either. Are you sure the profile is set up correctly?
I just pushed an update (1.3.1) see if that solves it. The atomizer screen had an unused control in the staging area which I deleted in this update. I'm sorry it's glitching on you, thanks for letting me know!
-
On 4/10/2018 at 9:09 AM, Yorkyboy said:
Hi Tim. Fantastic theme. Just started using it and love it. One thing, I cannot lock the device. All settings seem fine, but 5x click does not lock it.
250c by the way :-)
19 hours ago, kai0303 said:Agreed, 5 clicks do nothing at the moment. I have to click about 10 times to lock the device.
Just a minor inconvenience that is probably easy to fix. Apart from that it is a great theme.
16 hours ago, Yorkyboy said:Just been playing and if you reduce the clicks in the lock screen menu to 3 it locks in 5/6 clicks
That is very strange. Can you check to see if it happens on the main screen as well as a non firing screen like "Sys Status"?
I can't see how a theme would be able to affect the lock system. I don't have a 250c to test it unfortunately.
I'll keep looking into it. Just pushed an update (1.3.1) that fixes a few minor things. See if that helps?
Thanks for letting me know guys!
-
The last update for DNA75c is 1.2.3. The last update for DNA250c is 1.3.0
Version numbers are a little messed up right now. I'll reset them in the next update and update them separately.
-
Awesome thank you very much @Mjag!
Everyone please make sure to download DNA75c-Gauges-1.2.4.ecigtheme if you have a DNA75c mod, or DNA250c-Gauges-1.2.4.ecigtheme if you have a DNA250c version.
Turns out you can't install a DNA250c theme on a DNA75c mod.
-
Pushed an update to support Replay mode in DNA250c.
I don't have a DNA250c device so I didn't get to test it. Please let me know if you find a bug or if something wasn't done right.
Does anyone know how I can edit the automated screenshots generated upon uploading a theme here? Right now the thumbnail shows replay mode, I'd rather it show the wattage mode like before.
-
5 minutes ago, Robert_ZR said:
Good afternoon! Under the firmware 1_1_SP27_INT.sw-service will update?
Good morning! Yeah that should be good, that's the exact firmware I have on my VT75D.
-
Unfortunately it's the theme designer generated screenshot. I heard of this international firmware that let's the 75c get to 100w, but I'm not using that. I max out at 75w.
-
If anyone finds a bug in this theme in a DNA250c device please let me know. Everything should work, but I don't have one to test it out to be sure.
-
3 hours ago, Fr33sp1r1t said:
You say at the beginning of your intro " All the graphs and numbers should update while firing ". I only get the numbers for power/temperature updating when firing, the graphs are static. The graphs update when I change the value of power/temperature. I was just wondering if anyone else had this. I am using EScribe Suite 2.0 SP12/ firmware 1.1 SP27 (International Edition) if that makes a difference.
The other numbers and graphs update too when you fire. But their changes are so small you can't notice it in the graphs.
-
@realdigital 1.2.3 now implements this:
Quotewhen using it in wattage mode you could use voltage for the blue bar instead of nothing ...
Thank you so much for the suggestion
-
@blue_moon979 Thanks man! I really appreciate it
The resistance listed under the blue bar will lead to that screen. If there's no atty attached, or if it's not making solid connection you'll get that screen. If it pops up on it's own and it's blank then I'm not sure what's going on.
@realdigital That's a great idea about graphing voltage. I'll do that in the next version. Thanks!
I do agree about the field being too small. It still works withing wrapping so I didn't really try to change it up. That screen will probably get an overhaul in a future version.- 1
-
Just released a 1.2.1 that changes the menu navigation system.
That's the only difference between 1.2.0 and 1.2.2, how the menu looks and functions..
-
Hey guys I updated the theme (v 1.2.0) with the features you asked for.
You can change the material of the profile via the atomizer screen.
You can see live puff info, last puff info, graph etc.
Let me know what I'm missing. Thank you for using the theme
-
Ahh I see. I myself mostly use the main screen, to check battery percentage and watts/resistance. Anything beyond that I use escribe, and that happens once in a blue moon.
I wasn't aware that a good portion of the users use the mod to do all these things. I'll update the theme in a few days with the features that it's missing.
Thank you guys for letting me know!
- 2
-
Gotcha. Thanks I'll look into it.
-
Thanks I appreciate it.
Can you point me to other themes that display that sort of information? Or perhaps screenshots of those info displayed on your current theme?
If by Live Info you mean puff information including the graph, you can see that from SYS -> Puff Info. You can even fire from that screen.
If you mean you want to see the current temperature, resistance and power being delivered at any point during the puff, the graphs and numbers are updated live on the main screen.
Material-ish Fire - DNA75c -DNA100c - DNA250c Optimized
in DNA 75 Color, 100 Color, 250 Color
Posted · Edited by SirTimmyTimbit
Done! Version 1.4.0.
All three themes now have the same features and customization options.