jurdanas

Merry Christmas all EVOLVE team and forum members!!!

ChunkyButt200 Best job!!! I envy you.

Thank you

I like 28.5 volts friendly

Maybe better: for your "cell soft cutoff" i would input a cutoff of 2.75 volts

ari Atomizer have bad coil, create new coil, try again (clean atomizer dry !!!!!!).

dwcraig1

ChunkyButt200 say good words. Or https://www.amazon.de/Charge-Ladeadapter-AiPower-Samsung-Galaxy/dp/B01B63T7TE/ref=sr_1_1?ie=UTF8&qid=1476442068&sr=8-1&keywords=aukey+PA-T13 Have charger and good USB cable.

HAHAHA......

Willy Sorry, but I don't have computer in mine pocket edit: Situation by YiHi SX350j chip software, one year's create updates when board run good. EVOLV create 1,5 year's DNA200 updates - don't have "full good work". Why DNA75 software work good? I'm sorry if anything incorrect.

It's bad if DNA200 don't have update. My box-mod work with LiPo 3S1P 1000mA. If mod sleep, connecting to PC - dead battery meter. If mod sleep, connecting to charger - dead battery meter. No good situation if DNA200 don't have update. p.s.: ........ Sorry Admin said: ...may be....

I don't make this.

"Hcigar vti200" made long time ago, DNA200 board some use of energy, try to charge the battery separately, by one cell. I do not believe that DNA200 bad. VapingBad said true - "It should turn on" without atomizers. Try, if can.

New battery work well after only 5-8 full charge - recharge. Everything will be fine. Don't recharge less 30% first times.

Evolv SS316 curves work well, to me, no need speed.

ForgottenJedi Maybe change 510 pin to normal, no BF. Try. How it works? Five days ago to die my 510 pin from RX, same mistakes showed. Cleanse DNA200 chip, I cleaned my DNA and resistance become less 0,02ohm (mystic)

change mod resistance from 0.012 ? to mod resistance 0.0012 ? or 0.002

My old post: "DNA200 v1.2 SP3 firmware, after 2 days. There is a mismatch, to me, "temperature protection" is not lit(flash) three times, only one, I create in spite of three 1,5x1,5s. Maybe bug? " Next post: "And to me. May be so (is good?)" From up After one month try "DNA200 v1.2 SP3 firmware" I say: works good. If the temperature changes for short (420-430 F) - flash once "temperature protection". If coil dry - flash three "temperature protection". A similar principle of DNA75 when battery low. It's perfect. Sorry four my opinion

Same time. My battery meter flash 0% when connecting charger when mod sleep, create reboot, and battery meter work good (30%). When mod don't sleep - connecting charger and battery meter work good. Don't understand ??? With SP3 I make 3 reboot in 1 month??? I have LiPo-3S, no 18650.

And to me. May be so (is good?)

I understand. If have a warranty - to Evolve If haven't warranty and there is a desire to repair - soldering(insert and solder). We have hands

Maybe helps: from here http://ecig.eucaly.net/archives/cat_68955.html

DNA200 v1.2 SP3 firmware, after 2 days. There is a mismatch, to me, "temperature protection" is not lit(flash) three times, only one, I create in spite of three 1,5x1,5s. Maybe bug?

Today my vape, LAUDE DR75 & SM Kayfun-V5. I'm crazy

Hello. I have DNA200 with "2016-02-23.sw-update" date 2016.05.06. We have new firmware "SetupES 2016-08-05 EScribe 1.2". He have new "2016-02-23.sw-update" date 2016.08.05 and update SP file "1_2_SP2.sw-service". I have a question, if possible. How to update? 1. Overwrite "2016-02-23.sw-update" to new? 2. Or install SP file "1_2_SP2.sw-service"? Helped me, please. Thank you