Jump to content
Evolv DNA Forum

retird

Moderators
 View Profile  See their activity

  • Posts

    2,610

  • Joined

  • Last visited

  • Days Won

    135

 Content Type 

Posts posted by retird

  2. DNA 75 will not go to 'sleep' - Any ideas?

    in EScribe, Software and Firmware

    Posted

    So it now sleeps when not plugged into USB?  That's good....

    Hum...... some of that process puzzles me as my understanding of USB ports conflicts with what the process is doing (step # 3, step #4, step #6, step #9).

    #3.  Closing the screen (closing EScribe) does not sleep the computer or the computer ports. The ports on the computer are still active. If they weren't active then you couldn't charge the device unless EScribe was running. 

    #4.  With EScribe closed and the device plugged in to charge the device should still charge (bolt showing) until the battery is charged (bolt goes off).  Closing EScribe should not cause the charge bolt to go off if the battery needs charging.

    #6.  The device should show no bolt because the mod is not connected to charge. How is it determined that the mod is acting as if in charge mode? When in charging mode the bolt should show.

    #9. After step #8 with the usb connected again the mod should charge (charge screen showing w/ bolt) if the battery calls for it.

    Maybe I'm not understanding the process you post, so I post only for clarification and ask for correction of my conflicted understanding of the steps I mentioned.... THX

    Your issue is quite rare.... never seen this one up until now... 

  13. DNA 75 will not go to 'sleep' - Any ideas?

    in EScribe, Software and Firmware

    Posted

    So I'm guessing the ecig file you got from facebook was not an ecig file from Vapedroid but was an ecig file somebody created with some profiles they set up.  I would contact Vape droid and ask them to send you the ecig file.  It still may be that your current ecig file is OK and the board may have an issue but the logical thing to do is get an original ecig file and then if that doesn't resolve the issue then it may be a board issue.  If I recall the droid has 90 day warranty and the board has one year from Evolv.  

  14. DNA 75 will not go to 'sleep' - Any ideas?

    in EScribe, Software and Firmware

    Posted

    Ok, I am doing the same thing here as you are doing there.  When plugged in to charge it is doing what it should and you should see a red LED light (and lightning bolt) while charging turning to green (and no lightning bolt) when charged.  With the Charge brightness set at 50% and not plugged in to charge the screen should go out after 60 seconds or so.  

    So the original ecig file that came installed in the device has not been changed?  If it has then it may be the ecig file you installed may have an issue.  If the ecig file wasn't replaced from the original then you may have a board issue.  That's my best guess from what you are seeing.  

    Has it done this from the start as a brand new device?

    What device is your DNA75?


  17. Why can't someone come up with an SS316L profile

    in General Discussion

    Posted

    2legsshrt said:

    Well thanks guys for all the help but I discovered it was user error more or less. I was expecting it to act like a YiHi. I DL SE .csv file for SS316L made it temperature dominant and it works great. The temp is different then the YiHi but I think it is better then the YiHI. I like it so much I bought 2 more a Triade and a Lavabox75. Plan to get a couple more also. Thinking along the lines of a 133. I wish I would've believed people about how good these DNA boards actually are I would have saved a lot of money. I sold my SXmini Q's and bought a couple more DNA's



    Glad you are enjoying the Evolv technology devices.  Welcome aboard......  !!!!!!

  23. Efficiency 85%??

    in General Discussion

    Posted

    So with all the posts to date "What has been accomplished" and "What is it you are searching for @set5"?  

    Buck-Boost is not as efficient as Buck regulators and a quality battery is better than a battery of lesser quality.  Seems simple to me but I must be missing something...  no problems with battery life here on my 200's or 75's.

  25. Efficiency 85%??

    in General Discussion

    Posted

    hum.... so only difference between the two devices while vaping is the battery....  The Efest 26650 being the lesser of the bunch... So if you put the VTC5A in the VT75 what is the results... Mooch rates the VTC5A at 25A and the Efest 26650 at 23A but the Efest also heats up quite a bit more in use...

    What is the cell soft cut-off of the SX M and what do you have the cell soft cut-off set to on the VT75?

×
×
  • Create New...