Jump to content
Evolv DNA Forum

Evolv Default Enhanced 250C Theme 3.5

   (7 reviews)
JMat76
 Share

2 Screenshots

About This File

Several modifications keeping the overall default Evolv theme look.

Main screen "Firing" now red when firing as well as all menu or status bars.

On main screen when not in active Replay saved puff you can select the ohm reading to shortcut you to the Coil Info screen.

Settings changed to Menu for new menu / settings platform

Most "Back" buttons removed and scroll up of down off the screen to go to the previous screen.

Watts now adjustable in 1 watt increments instead of .1.

Temp adjustable in 5 degree increments.

New menu platform dived into Profile, Puff Info, Coil Info and Settings on main menu.

New coil install screen now has cold ohm temp for new coil and old coil resistance and temp when deciding on new coil or keeping old settings.

Profile Menu has added cold ohm temp with current ohm reading and coil material setting added. Also added is the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active.

Puff Info screen enhanced with chart and ability to change wattage and or temp for dialing in a perfect puff. Also the addition of several live readings of the last puff. Live ohms, room temp,average power, puff duration, puff volts, puff amps, and average puff temp, and max puff temp when in temp control. When a non-temp sensing coil is installed gives you current battery % instead of temp.

Recording Screen with new additions to be able to monitor with every puff.

New Coil Info screen added with time, battery %, current profile, coil material, cold ohms, live ohms, coil temp, ability to remeasure resistance, and ability to lock ohms.

New settings menu with System, Display, Device, and About.
System gives you date, time, 12 / 24 hr, F or C temp, max puff time and serial number.

New Display menu has brightness adjustment, always on, stealth level, auto lock, auto lock time out, and # of clicks to lock, and ability to set unlock device sequence.

Device screen now has power bank settings, and battery voltages for up to 4 batteries.

About Menu with Lifetime puff count, Theme revision,  current firmware, current revision, edition, current puff count, puff count total energy, and reset to take you to a rest statistics screen.

Thanks to everyone on the Evolv forum for ideas and themes to give me inspiration for this theme!

Evolv Default Enhanced 250C.ecigtheme

 

 

 

Evolv.png

 

Evolv Default Enhanced 250C.ecigtheme

What's New in Version 3.5   See changelog

Released

New Version 3.5

Fixed glitch with main screen clock toggle and preheat + toggle.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 3.4

Added ability to have a clock on the main screen.

Status bar on the bottom of the screen can now display the clock when not firing and still shows firing and issues when needed.

Toggle Main screen clock located under display in settings menu, toggle on or off.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 3.3

More visual improvements.

Added coil material to the new atomizer screen so you see your profile and coil material now.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 3.2

Update for the temp control vapors

Added  the availability to have advanced preheat settings with the Preheat+ toggle when temp control is active on the Profile Menu. You can now toggle on Preheat+ to have the ability to adjust preheat watts and preheat temp.

The ohm emblem on the Profile Menu now takes you to the Coil Info screen to adjust, remeasure, and or lock ohms.

Lots of readjusting and realigning to get the theme as clean and visually appealing as possible but keeping the overall simple default look.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 3.1

Added all old Status screen readings to Puff Info screen per request for the Status screen info.

Enlarged serial number box some to accommodate other devices to read clearer.

Fixed Coil Info screen to go back to parent screen instead of Main  screen on exit.

Some visual improvements.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 3.0

Removed Status screen and replaced with Coil Info screen

When on main screen and not in active Replay saved puff, you can select ohm reading to shortcut you to coil info screen to remeasure and or fine tune coil ohm reading per a user request for more exotic coils.

Other visual improvements overall.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 2.3

Small adjustment to the Puff Info screen

Left arrow takes you back one step at a time, right arrow takes you to newest puff.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 2.2

Fixed Temp highlight issue on Puff Info screen

Added ability to change watts in Replay on Status screen

Evolv Default Enhanced 250C.ecigtheme

 

New Version 2.1

Further appearance adjustments overall.

Added ability to change unlock sequence to display screen

Evolv Default Enhanced 250C.ecigtheme

 

New revamped Version 2.0

Overall visual improvements and better refinement with removal of redundancies across screens.

Back buttons added back to Menu and Settings with round robin scrolling as it just seems more functional.

Added coil material to Profile and Status Screen for those who want custom profile names.

Profile screen now has a lock ohms option if needed.

Removed ohms measurement on Status screen as it can be done on Profile screen.

Device screen is a complete makeover now with power bank settings as well as individual battery voltages for up to 4 batteries.

About screen changed lifetime energy to lifetime puffs. Reset now takes you to separate reset screen to prevent accidental resets.

Reset screen added with current puff info, yes or no to reset, and reset counts.

Evolv Default Enhanced 250C.ecigtheme

 

 

New Version 1.6

Added punch / preheat in place of the status bar on the Puff Info and Status screen to better help dial in the perfect puff.

Added USB / Computer connection logos to the lock screen along with current charging amps when connected to either one.

Spaced time and date fields on the lock screen for a little better visual effect.

Evolv Default Enhanced 250C.ecigtheme

 

New Version 1.5

Further refinements to theme

Grayed out non-selectable options on Status, Puff Info, and Profile screens

Added Puff volts and amps to Status and Monitor screens when not using temp control

Evolv Default Enhanced 250C.ecigtheme

 

New Version 1.4

Fixed Puff Info screen to accommodate larger puff counts

Evolv Default Enhanced 250C.ecigtheme

 

New version 1.3

Fixed a couple of temp readings to read only.

Evolv Default Enhanced 250C.ecigtheme

 

New version 1.2

Fixed a few bugs and misaligned fields.

Let me know of any problems encountered please.

Evolv Default Enhanced 250C.ecigtheme

 

  • Like 4
  • Thanks 2
 Share
Previous File Clouds
Next File Rick & Morty Portal Theme

User Feedback

Recommended Comments

maximumsport

Update to my review:

Love the new updates. You read my mind. 3.2 is solid now I can finally see all the options battery cells, preheat..etc.. with just the default theme which I've always loved but now with your edit its perfect! Keep it up JMatt.

Link to comment
Share on other sites
JMat76

Thank you for the response and I am glad you are happy with the update. I've been working on just how to implement it for a while and just couldn't really figure out the best option to but I am very pleased with the way it is now. Hopefully everyone who uses temp control over replay will love this  option.

Link to comment
Share on other sites
Terra

Mod:  Lost Vape Paranormal DNA250C

I'm using 3.2 and I'm having an issue with "max puff time".  I have changed it via:  Safety->"Max Puff Time" = 20s 

I like to use lower wattage, preheat then take longer RTL hits so the average ends up being ~13s.  Yes I know I can bounce the fire button, but that messes up my Puff Info statistics.

In the theme, it shows up as: 20s (in orange) and if I try to adjust it, it will drop to the default "10s" and cannot increase over "10s"

However, the worst part is that even when set to "20s" the mod will not fire beyond "10s".  I do not know if this is an issue with my mod or with a theme field control.

Other than this issue, I love this well thought out and advanced  Theme.

Link to comment
Share on other sites
Terra

Never mind, I figured it out.

 Had to enable the (advanced) Manufacturer settings in EScribe and increase the "Manufacturer Max Puff Time" as well (it was still set to 10s).

The Theme is now properly handling the full "Max Puff Time" increment range of: 0-20

Link to comment
Share on other sites
Terra

I'd like to make a suggestion for the main screen.  There is an available slot at the bottom (occupied by a red DNA), and I tweaked your Theme to put a "clock" there.

--------------
[....]
24 W
MENU
08:19am
--------------

*sorry about the ASCII art, I couldn't upload a JPG image file. (ThemeClockTweak.jpg - 9kb - Upload Failed)

Main Screen Clock Tweak

My mod is usually on this screen because I use Kanthal profile in wattage mode.

What do you think about making this a permanent feature of your theme?

Link to comment
Share on other sites
JMat76
On 7/16/2019 at 10:18 AM, Terra said:

I'd like to make a suggestion for the main screen.  There is an available slot at the bottom (occupied by a red DNA), and I tweaked your Theme to put a "clock" there.

--------------
[....]
24 W
MENU
08:19am
--------------

*sorry about the ASCII art, I couldn't upload a JPG image file. (ThemeClockTweak.jpg - 9kb - Upload Failed)

Main Screen Clock Tweak

My mod is usually on this screen because I use Kanthal profile in wattage mode.

What do you think about making this a permanent feature of your theme?

Check out version 3.4, added a toggle for your request.

Link to comment
Share on other sites
Terra
9 hours ago, JMat76 said:

Check out version 3.4, added a toggle for your request.

Perfect, works great, thank you very much for being so responsive!  Now I don't have to manually update the theme to include this anymore each time you make a new release.

One minor issue, the About::Theme Rev still shows 3.3

 

Link to comment
Share on other sites
JMat76

I just updated all the links and it should be good now. I don't know why it wasn't updating but I checked them and they should all be 3.4 now.

Link to comment
Share on other sites
akedintm

hi guys,

can someone please help me to bring back the " back " buttons from the menus ? I love this enhanced theme but I miss the back buttons :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...