Kisotama Posted June 6, 2022 Report Share Posted June 6, 2022 (edited) Hi guys, So I've been stuck in this situation for about 2 week and still found no answer Every time I use a 0.15 coil always fire at around 40w ( I set at 65w ) for no reason and I'm using wattage mode, I've search on gg and found that some said because of the tc mode but I don't see any tc in watt mode (lol) how do I fix this ? btw I don't think this problem from the battery because I use cylad 18650 40A on both z100c & sx mini mx class, the sx can fire up to 80w while the geekvape z100c can fire around 40w device : geekvape z100c tank : wotofo profile m rta with adapter Edited June 6, 2022 by Kisotama Link to comment Share on other sites More sharing options...
BillW50 Posted June 6, 2022 Report Share Posted June 6, 2022 Either the cell can't supply enough amps (has Mooch tested the Cylad 18650 40A for 40A?) or you have battery connection problems. 1 Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 I notice that if the board in diagnostics not going to 40 degree or further , the device has no issues with wattage drop , idk what happened to my device but it sound like tc mode despite I'm using wattage mode Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 Hoover your mouse over the area indicated by red arrow. That is the voltage drop on your cell when firing. Report back to us what that voltage is. 1 Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 3.4v but when the board up to 40 degree the volt drop to 2.4 Link to comment Share on other sites More sharing options...
BillW50 Posted June 7, 2022 Report Share Posted June 7, 2022 Yup, battery voltage is too low and the mod drops the wattage to compensate. Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 So if your able to get 80 watts out of your other mod with that cell then it is most likely a poor connection between the battery and it's contacts. That cell is at best a 20 amp cell but should do more than 40 watts. Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 I tried a brand new samsung 40T 21700 and it's fixed but when the device feel a little bit warm it's starting drop wattage again , idk why it drop wattage every time the device hotter Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 Anyways how can I change the temp protect on this mod , I thinks it's start from here Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 The wire type needs to be something other than kanthal or nichrome and be in a profile for temp wire for temp vaping to be activated. Use the appropriate profile. Example Watts profile with Watts selected for material, no temperature control there. Does your voltage drop change a lot after it get warm? Where does the heat appear to come from? Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 It's come from the mod , I checked the board when the wattage start to drop and it's above 40 degree Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 Here's mine firing at 65 watts 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 Your voltage drop should be very close to mine, perhaps a bit less with your 21700. 1 Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 what battery did you use ? Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 It is a Samsung 20S 18650, a true 30 amp cell. 2000 mah Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 alright tks , I will try it Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 7, 2022 Report Share Posted June 7, 2022 A Samsung 40T is a 30 amp 4000 mah cell, the perfect choice for your mod. The Samsung 30T is another good choice, 35 amps and 3000 mah. 1 Link to comment Share on other sites More sharing options...
Kisotama Posted June 7, 2022 Author Report Share Posted June 7, 2022 hmm can a 3000 mah can last for a day ? Link to comment Share on other sites More sharing options...
Wayneo Posted June 7, 2022 Report Share Posted June 7, 2022 80 watts all day on a single battery is a tall order. 🤔 The best way to estimate would be to use this. Put in your battery specs.https://www.steam-engine.org/batt 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now