TorturedZen Posted May 19, 2022 Report Share Posted May 19, 2022 Good afternoon esteemed colleagues. I have 3 DNA mods - Lost Vape Drone, Dovpo Odin Mini and Lost Vape Hyperion. I can connect with my Hyperion to Escribe using USB 'C' without a problem. But neither the Drone nor Odin will connect using the an older USB 2.0 type cable. All my cables are "data" capable and have used the same 2 cables for quite a while now without any issues. So, I've tried swapping cables and connecting to different ports on my PC. No joy. The funny thing is the mods will charge off the USB, they just won't connect! WTF? Can somebody offer a solution for this before I freakin go postal? Escribe is Ver 2.0 SP 30.1 International - PC is Win10 Link to comment Share on other sites More sharing options...
retird Posted May 20, 2022 Report Share Posted May 20, 2022 I guess you have ruled out the data cables being bad....Have you determined the computer USB port still flows data? Link to comment Share on other sites More sharing options...
TorturedZen Posted May 20, 2022 Author Report Share Posted May 20, 2022 Yes, all ports are functional and it sees the Hyperion immediately. Link to comment Share on other sites More sharing options...
retird Posted May 20, 2022 Report Share Posted May 20, 2022 Did the non C devices both stop connecting at the same time? Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 20, 2022 Report Share Posted May 20, 2022 Look in Windows Device Manager when connected to the non C. If it looks like this Windows sees it but doesn't know what to do with it, no drivers, ect. If it isn't showing up then the device isn't communicating with Windows for what ever reason. Link to comment Share on other sites More sharing options...
BillW50 Posted May 20, 2022 Report Share Posted May 20, 2022 11 hours ago, TorturedZen said: I can connect with my Hyperion to Escribe using USB 'C' without a problem. But neither the Drone nor Odin will connect using the an older USB 2.0 type cable. I have one Dovpo Abyss DNA60 that won't connect unless the battery is removed, then it connects just fine. Did you try it without batteries? I know it is a shot in the dark, but easy to try. Link to comment Share on other sites More sharing options...
TorturedZen Posted May 20, 2022 Author Report Share Posted May 20, 2022 I have managed to solve the issue although I still don't know what caused it. After a bit of research (to make sure nothing would be damaged) I opened Win10 Device Manager, located the 'USB Host Controller' and selected the option to remove it. Win10 gives a warning that it will reboot. After rebooting, the Host Controller re-installed itself and Voila! All mods are connecting again. Go figure...LOL Thanks to everyone who replied here. I appreciate it! 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now