US or INT firmware?

[greenwich444]

Hi there! I have Lost Vape Centaurus DNA250C. Where can I see the version of my firmware? As I known there are two editions for US and International. Maybe I can find information on the box or serial? Thank for heip!

Edited July 20, 2021 by greenwich444

[dwcraig1]

In the bottom right side corner of Device Monitor in EScribe

[greenwich444]

1 час назад, dwcraig1 сказал:

In the bottom right side corner of Device Monitor in EScribe

Thank you, I'll check it 

[greenwich444]

Hello again!My version 1.1 SP38 INT. But how can I check my device is US or INT edition and it's right edition of firmware for my device? And if it is any difference of editions?

[dwcraig1]

The devices are the same other than firmware. 

[greenwich444]

54 минуты назад, dwcraig1 сказал:

The devices are the same other than firmware. 

Thanks for reply!What the difference in firmwares US and INT edition?

[Wayneo]

Moved to proper forum  

[greenwich444]

8 минут назад, Wayneo сказал:

Moved to proper forum  

Sorry, I'm a new user.Where I can find answer?

[greenwich444]

Hello!I'm new user of Centaurus DNA250C. Please, help me with that. What the difference in US and INT firmware?And what is it right for my device?

[BillW50]

INT stands for International version. US stands for US version which is compliant with the FDA regs. For a DNA250C configured for two cells, I don't believe there are any operational differences. Just the US version will only go up to 250W when using 3 and 4 cell mods (200W with 2 cells). While the INT version goes up to 300W with 3 cells and 400W with 4 cells.

Edited July 20, 2021 by BillW50

[greenwich444]

46 минут назад, BillW50 сказал:

INT stands for International version. US stands for US version which is compliant with the FDA regs. For a DNA250C configured for two cells, I don't believe there are any operational differences. Just the US version will only go up to 250W when using 3 and 4 cell mods (200W with 2 cells). While the INT version goes up to 300W with 3 cells and 400W with 4 cells.

Thanks. And where can I check edition of my device from box?Maybe it in the serial or any other place?

[BillW50]

Some themes have an info selection that you can check. If not, EScribe's Device manager will tell you on the bottom right.