Therion BF DNA75C

[tarunprakashsingh]

Guys,

few things wrong with mod.

1. As soon as I sqounk the mod shuts down, starts only when i take battery out and put again. Then works fines till i have to sqounk again. 

2. Battery charges only to 87-91% only. 

 

Help is needed urgently...

[retird]

Do you get an error message when it shuts down and you try to fire it?

[tarunprakashsingh]

No error no message just shuts off

[retird]

Could there be a loose connection in the battery tray?  Squonk may move the batteries a bit.... can you hold the bottle outside of the device and squonk it and see if it shuts down that way also?

[tarunprakashsingh]

Will try that...

[tarunprakashsingh]

How can i send it to evolv to check and repair? Some one told me it can be done.

[retird]

3 minutes ago, tarunprakashsingh said:

How can i send it to evolv to check and repair? Some one told me it can be done.

Start a ticket with Evolv and they will guide you...   https://helpdesk.evolvapor.com/index.php?a=add&category=1

[Wayneo]

If you remove the squonk bottle and the battery is there eliquid inside the box itself?

[tarunprakashsingh]

So i took rda off. Used compressed air on 510. Lot of juice came out. Cleaned it and  now its working. I feel juice is leaking in btw 510 and rda on to 510... 

not sure how to fix it

[Wayneo]

I don't own a Therion, but for squonkers there are 2 types of connections. One 510 pin (in the mod) is spring loaded, so various rda's will push on it and make a sealed connection to help prevent leakage. The other you need to adjust the 510 in the mod and rise/lower for each different rda to ensure a sealed connection.

Bit of maintenance keeping everything clean is essential. Isopropyl alcohol and QTips are your friend. Compressors work too, but might not totally clean that VG.

[tarunprakashsingh]

It is spring loaded... but still leaks some how. Will try another rda and see if it because of rda or mod... 

cleaning with alcohol will take away VG?

[Wayneo]

I have only used Isopropyl alcohol, vinegar, or windex  

[PKT]

I also had juice get into my brand new Paranormal DNA75C, I thought the 510 was sealed but when set upside down for a couple of hours a disturbing amount came out. I was using the KYLIN which  was new to me as well. I took it off and onto an older mod until I figure out it's deal.

Luckily it still works, the temp control went a bit wonky but that may be my coil. Does anyone know if the board & important guts are sealed off from the 510 connection? You can't get into this thing.