dleone32 Posted August 28, 2017 Report Share Posted August 28, 2017 So.... I've just noticed a problem with my Triade DNA250. I put one set of batteries in and they are fully charged. The battery reading on the mod says 84%.. I tried with 2 different sets of batteries and both sets read 84% . Both sets are fully charged. I tried download a CSV file and that didn't help... I'm having a hell of a time with it. I would really like to fix this issue. I love this mod. Has this happened to anyone else? Does anyone know a possible fix for this issue?? If someone could help me I would appreciate it so much... Thank you for your time. Link to comment Share on other sites More sharing options...
dwcraig1 Posted August 28, 2017 Report Share Posted August 28, 2017 Try dropping the watt hours shown in the Mod section of Escribe by 15% and wait awhile. 1 Link to comment Share on other sites More sharing options...
Geoff Posted August 30, 2017 Report Share Posted August 30, 2017 Yes- you must Monitor your batteries with Device Monitor and note the Wh rating is when the charge current drops to just about 0 mA. For my old but still good 25R's the WH reading is ~13.9. 1 Link to comment Share on other sites More sharing options...
dleone32 Posted August 30, 2017 Author Report Share Posted August 30, 2017 1 minute ago, Geoff said: Yes- you must Monitor your batteries with Device Monitor and note the Wh rating is when the charge current drops to just about 0 mA. For my old but still good 25R's the WH reading is ~13.9. That sounds really confusing. I'm not really good with all the technical talk. I'll figure it out sometime I'm sure. Thank you for your help. Link to comment Share on other sites More sharing options...
Geoff Posted August 30, 2017 Report Share Posted August 30, 2017 Hi Again dleone32. I have a Drone- so only two batteries to deal with- your Mod has three- still use escribe to monitor the charge current in the Device Monitor Tab of escribe. Link to comment Share on other sites More sharing options...
dleone32 Posted August 30, 2017 Author Report Share Posted August 30, 2017 12 minutes ago, Geoff said: Hi Again dleone32. I have a Drone- so only two batteries to deal with- your Mod has three- still use escribe to monitor the charge current in the Device Monitor Tab of escribe. Do you think they have a YouTube video that does a breakdown on what to look for? Link to comment Share on other sites More sharing options...
Geoff Posted August 30, 2017 Report Share Posted August 30, 2017 DLJsb on youtube has an eScibe tutorial. Link to comment Share on other sites More sharing options...
Geoff Posted August 30, 2017 Report Share Posted August 30, 2017 Sorry,- DJLsb is the correct channel. Link to comment Share on other sites More sharing options...
VapingBad Posted August 30, 2017 Report Share Posted August 30, 2017 Ultimately the % and specifically 100% will come from the voltage the mod is reading from each battery cell together with the battery cvs. Assuming the csv is normal (100% = 4.2 V) and your battery type is set to Lithium Polymer then one or more cells are probably reading low. You can see the cell voltages in EScribe Device Monitor or set them as custom fields in the Screen tab in EScribe. If you have the mod set for Max Recharges 100% = 4.1 V and the 200 & 250 battery meter has a memory like mobile phones so it can take a little time for it to adjust if you change the batteries. 2 Link to comment Share on other sites More sharing options...
Geoff Posted August 31, 2017 Report Share Posted August 31, 2017 Her are a couple Screenshots of what to look for. Link to comment Share on other sites More sharing options...
Geoff Posted August 31, 2017 Report Share Posted August 31, 2017 Batteries Now Charged Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now