dleone32

Do you think they have a YouTube video that does a breakdown on what to look for?

That sounds really confusing. I'm not really good with all the technical talk. I'll figure it out sometime I'm sure. Thank you for your help.

So.... I've just noticed a problem with my Triade DNA250. I put one set of batteries in and they are fully charged. The battery reading on the mod says 84%.. I tried with 2 different sets of batteries and both sets read 84% . Both sets are fully charged. I tried download a CSV file and that didn't help... I'm having a hell of a time with it. I would really like to fix this issue. I love this mod. Has this happened to anyone else? Does anyone know a possible fix for this issue?? If someone could help me I would appreciate it so much... Thank you for your time.

I'll put an order through for some new batteries. What would you recommend? The therion 75 is powered by dual batteries running in parallel. Glad you enjoyed the screen shot ?

@Wayneo Pardon me for not knowing too much about what I'm asking questions about...

Do you have any suggestions on what I could do to fix that? Do you know why that's happening?

Weird. Does it pose an issue if I continue to use it despite the flashing battery bar?

I tried a set of Sony VTC4's and the issue is still the same.

The battery bar seems to flash when the wattage is at a certain point. If I'm using the crown with the .25 coil, the mod reads between .25 and .33 I've read that people have issues with the crown tank on the therion. The ohms will jump around. When I put the herakles plus tank on there with the .40 ohm coil it reads .41, the battery bar will blink if I run it anywhere above 65 watts.. Is the issue that two 18650 batteries have trouble pushing a certain amount of wattage for certain coils?

I haven't had any problems with the efest batteries. It was the LG's that were causing the issue. I have yet to drain the efest batteries down to 60% to see if they will cause the same issue the LG's were.

I was using LG HG2's. Now I'm using the 3000mah efest batteries. The LG's have been used for a while. The efest are a little more new.

Well nevertheless, thanks again!

I cleaned off the terminals. Seems to have some decent resistance on the springs for the negative connections. Maybe its the batteries? It doesn't flash when the batteries are above 70%. I'm going to try using it until it's under 70 with the batteries I just put in. I'll let you know how it goes. Thanks for your help.. I see your name is Giz, would that be the same as GizzardStew from YouTube??

I think I get what you're saying now, 3.19