boxer 167 battery flash after 60% & lower

[Lowbytes]

vor 2 Minuten schrieb dwcraig1:

That style of contacts is fine for toys and low amp draw flashlights and such but not a high amp device like a DNA200

Well said sir !

 

[dwcraig1]

This modification works well when using a coil spring (they in earlier times worked good enough at lower amps)

Factory done below. The wire is soldered to the disc.(braided wire)

[EDMKEV]

I bent the conact up a decent amount, couldnt quite fit anything in underneath yet but i wanna test it out first a few times and see if it is indeed just a battery contact issue, everything else doesnt make much sense besides not having a good connection, ill try and see maybe i might get a buddy to find something better to solder to it but for the price i cant believe what shitty contacts they use..that spring contact seems much better! What mod did you do that in? Ill have to see if a friend can solder something like  that together and make it fit, but for now ill see if i get better battery life with the better bent contacts and update.

 

[dwcraig1]

IPV2, but can be found in many others.

Escribe will show your battery sag....for better or...

Oh, I didn't do that, it was factory. I did solder the wire on the end of the spring where it contacts the batter on the last one I built (it came with the springs)

[Lowbytes]

vor 2 Stunden schrieb EDMKEV:

I bent the conact up a decent amount, couldnt quite fit anything in underneath yet but i wanna test it out first a few times and see if it is indeed just a battery contact issue, everything else doesnt make much sense besides not having a good connection, ill try and see maybe i might get a buddy to find something better to solder to it but for the price i cant believe what shitty contacts they use..that spring contact seems much better! What mod did you do that in? Ill have to see if a friend can solder something like  that together and make it fit, but for now ill see if i get better battery life with the better bent contacts and update.

 

We already did the same (german community) - bend the contacts and filled up the gaps in between the contacts with foam rubber - with great results - But to say it clear - best way would be to exchange the shitty contacts! Mine (boxer DNA133 - self made kit) working pretty fine in TC Mode - down to 3 Percent of batt power!