CuriousVaper Posted June 3, 2017 Report Share Posted June 3, 2017 I've got my Triade DNA250 with Triad RDA on it it reads on 0.13ohms with alien coils VTC6 batts, set it on wattage mode 100w but everytime i fire it, it changes to 63.4w only. Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 Run device monitor while firing, select the fields below (+ cell 3) and post a screen shot (pressing [alt]+[PrtSc] copies the active window to windows clipboard and you can just open MS Paint and past it in). 1 Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 (edited) here it is please help me. Edited June 4, 2017 by CuriousVaper Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 Ok it's not the batteries, you can deselect all the battery fields and voltage, temperature, board temp and live ohms. I noticed it fired fine the first 2 of the 3 puffs in the second screen, I would check the coils screws are tight. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 what should i do now? Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 Another shot of device monitor without the battery fields checked and with temperature, board temp and live ohms checked in addition to what you already have selected. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 like this? Link to comment Share on other sites More sharing options...
Wayneo Posted June 4, 2017 Report Share Posted June 4, 2017 15 hours ago, CuriousVaper said: changes to 63.4w only What made you think 63.4 watts only? Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 Yes, but when it is not firing at the power you want, it is working fine in that screen shot. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 (edited) because every time i fire it it changes from 100w to 63.4 (while firing) the mod. 63.4w is displayed on the screen of the device. Edited June 4, 2017 by CuriousVaper Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, VapingBad said: Yes, but when it is not firing at the power you want, it is working fine in that screen shot. the screen changes from 100w to 63.4w every time i fire it. Link to comment Share on other sites More sharing options...
Wayneo Posted June 4, 2017 Report Share Posted June 4, 2017 Well, normal behaviour is to show the wattage you set, you hit the fire button, display goes to 0, shows an intermediary value or 2 while it's headed to your set value. Keep watching that display on the mod, does it go to 100? Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 But Device Monitor is showing it stable at 100 W and that is the same data that drives the screen, except in your 2nd screen shot, but there is info in that to see why, the batteries are not too stressed and the current is reasonable, bat cant see the voltage, live ohms or temp. It would also be helpful to see the profile & mod settings. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, Wayneo said: Well, normal behaviour is to show the wattage you set, you hit the fire button, display goes to 0, shows an intermediary value or 2 while it's headed to your set value. Keep watching that display on the mod, does it go to 100? it goes like that. screen display (100w) not fired. fires it changes to (63.4w) then jumps back to (100w) while firing the device. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, VapingBad said: But Device Monitor is showing it stable at 100 W and that is the same data that drives the screen, except in your 2nd screen shot, but there is info in that to see why, the batteries are not too stressed and the current is reasonable, bat cant see the voltage, live ohms or temp. It would also be helpful to see the profile & mod settings. Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 Again that looks to be working perfectly, if you set you current limit to 26 A it may cause it to back off on the power, voltage is fine, it's is not attempting to do temp protection. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, VapingBad said: Again that looks to be working perfectly, if you set you current limit to 26 A it may cause it to back off on the power, voltage is fine, it's is not attempting to do temp protection. technically there is nothing wrong? sorry for wasting your time. i think i got it if what WAYNEO said that is normal to drop down up to 63.4w the moment i fire it then goes back to 100w while it is still firing. Link to comment Share on other sites More sharing options...
eucalyptus. Posted June 4, 2017 Report Share Posted June 4, 2017 Hi. "temp mode" may be the cause. When "Watt mode", temperature is not displayed in device monitor. I think temperature is displayed because it is "temp mode". Link to comment Share on other sites More sharing options...
VapingBad Posted June 4, 2017 Report Share Posted June 4, 2017 No worries, not wasting our time. Link to comment Share on other sites More sharing options...
Wayneo Posted June 4, 2017 Report Share Posted June 4, 2017 Close. You set 100w on your mod, like every other mod. 1st it showed (fire button) 0. Like a car when you floor it, you don't hit top speed immediately Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, VapingBad said: No worries, not wasting our time. thank you for helping. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, Wayneo said: Close. You set 100w on your mod, like every other mod. 1st it showed (fire button) 0. Like a car when you floor it, you don't hit top speed immediately thank you finally understand it. perks of being stupid and new to DNA mod haha. anyways thank for helping. Link to comment Share on other sites More sharing options...
Wayneo Posted June 4, 2017 Report Share Posted June 4, 2017 Enjoy your 1st DNA, it's all good. Link to comment Share on other sites More sharing options...
CuriousVaper Posted June 4, 2017 Author Report Share Posted June 4, 2017 16 hours ago, Wayneo said: Enjoy your 1st DNA, it's all good. uhm can you suggest a theme for DNA250 for lostvape? if its not too much to ask. Link to comment Share on other sites More sharing options...
Wayneo Posted June 4, 2017 Report Share Posted June 4, 2017 I think there's a theme's thread you can browse with more than you can imagine. I'm just an old guy with none really. Straight stylized text. I have/use zero images except one for my name using wingdings font. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now