sleeps board

[Alexei]

Hello!
I have this problem. If you leave the unit after using for a while, the device goes into sleep mode. To wake up the fee has to be connected yusb. The device does not wake up when you press the fire. It has so conceived or Problem?

[Vaportron]

Try hitting the fire button 5x to unlock

[Alexei]

The device is not blocked. To wake up the need to apply a voltage across the usb.

[yoseff]

Try updating firmware. Mine is behaving just like that, but i have Warranty message after being connected to escribe, and besides that it is charging at 0.09A and getting warm - So i suppose new VS to come... The second one. This one has maybe 2 weeks (more or less the same time than previous one, and both them was from same date) Maybe a bad batch?

[lollercaust]

I have the sleep issue as well, seems like the device is just dead until plugged into a usb cable.  It does seem fairly warm during charging and tends to stay warm for as long as it is plugged in, even after charging is complete.

[black lace]

As a matter of interest what devices are the boards fitted in..??

[lollercaust]

Hcigar VT200, says the board was programmed August 12th if that matters.

[Hakala]

My Hcigar Vt200 is doing the same, its always warm when plugged in even if it is fully charged. If I dont use it for 2-15min, the screen goes off and needs to be plugged in for it to wake up.
My other dna200 from vapecige has been working perfectly.

Photo of the temperature after it has been plugged in for 24 hours or so, not used, board is at 97F in full idle, my other mod is 85F even when in frequent use.



https://forum.evolvapor.com/topic/67027-topic/?do=findComment&comment=903151

[black lace]

Sos, am on mobile away from computer presuming youve allready done disconnect re connect battery and firmware update...looks like the outcome of most vt200 problems relating to battery and screen, in a nutshell, they got replaced not fixed...

[w4rr3n]

I have tried troubleshooting, on my own.
This issue was fixed on the newer boards I received from Evolv dated November previous boards are made in august.

It's a board issue as my own DIY got the same problem, after RMA every thing works fine.

[lollercaust]

Anyone know if it is possible to send the board from a retail model directly back to Evolve for replacement?  HCigar wants me to take it back to the vendor which is over an hour away.

[Spector NS5 RD]

@lollercaust if your board is still within the 6 month warranty and you have de-soldering skills yes they'll replace your broken board.