gninos Posted February 6, 2016 Author Report Share Posted February 6, 2016 OK so a couple days ago, I set my tank up with dual NiFe coils for temp control. Came out around .25 or so. After one pull on my vt200 it shut off at 95% power. I don't see anything wrong with the chip and it will not come back on when hooked up to escribe. Any help would be much appreciated. Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted February 6, 2016 Report Share Posted February 6, 2016 gninos said:OK so a couple days ago, I set my tank up with dual NiFe coils for temp control. Came out around .25 or so. After one pull on my vt200 it shut off at 95% power. I don't see anything wrong with the chip and it will not come back on when hooked up to escribe. Any help would be much appreciated. escribe does not recognize the device? feel comfortable enough to open the mod up and disconnect the batt then reconnect? if it won't turn on could be a fuse but should still connect to escribe. if it's still under warranty send it back. Link to comment Share on other sites More sharing options...
jarred.sayles Posted February 6, 2016 Report Share Posted February 6, 2016 I don't know if this is a glitch or a setting I have not set as of yet. But I have the standard "default' fields for the main screen but on the "charging screen" it's supposed to show my battery meter percentage and usb current (standard). Does anyone know why when I am charging my lavabox it still shows the main screen values and not the charging parameters? Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted February 6, 2016 Report Share Posted February 6, 2016 jarred.sayles said:I don't know if this is a glitch or a setting I have not set as of yet. But I have the standard "default' fields for the main screen but on the "charging screen" it's supposed to show my battery meter percentage and usb current (standard). Does anyone know why when I am charging my lavabox it still shows the main screen values and not the charging parameters? your charging brightness is set at 0. set it at 50 or higher. lol, this question is asked so many times. don't worry i had to ask the same question when i got my first dna 200. Link to comment Share on other sites More sharing options...
gninos Posted February 7, 2016 Author Report Share Posted February 7, 2016 How do I know if the fuse is blown without having a meter to check it? The mod does absolutely nothing after removing the battery. I do not have a warrant any more. I also broke the connection at the 510 outer ring but I think I can fix that with some solder. I am at a loss on what to do Link to comment Share on other sites More sharing options...
macz Posted February 7, 2016 Report Share Posted February 7, 2016 gninos said:How do I know if the fuse is blown without having a meter to check it? The mod does absolutely nothing after removing the battery. I do not have a warrant any more. I also broke the connection at the 510 outer ring but I think I can fix that with some solder. I am at a loss on what to do Blown if fuse turned to white Link to comment Share on other sites More sharing options...
jarred.sayles Posted February 7, 2016 Report Share Posted February 7, 2016 ChunkyButt200 said:[QUOTE=jarred.sayles]I don't know if this is a glitch or a setting I have not set as of yet. But I have the standard "default' fields for the main screen but on the "charging screen" it's supposed to show my battery meter percentage and usb current (standard). Does anyone know why when I am charging my lavabox it still shows the main screen values and not the charging parameters? your charging brightness is set at 0. set it at 50 or higher. lol, this question is asked so many times. don't worry i had to ask the same question when i got my first dna 200. [/QUOTE] Link to comment Share on other sites More sharing options...
jarred.sayles Posted February 7, 2016 Report Share Posted February 7, 2016 Right. After giving it some thought. I figured thats what it was. SO I changed it and it did work. But now Im wondering if you do have the brightness on while charging how much longer will it take to fully charge with the display showing some what? Link to comment Share on other sites More sharing options...
retird Posted February 7, 2016 Report Share Posted February 7, 2016 Display uses very, very little current....not even enough to be noticeable for charging time... Link to comment Share on other sites More sharing options...
dwcraig1 Posted February 7, 2016 Report Share Posted February 7, 2016 jarred.sayles said:Right. After giving it some thought. I figured thats what it was. SO I changed it and it did work. But now Im wondering if you do have the brightness on while charging how much longer will it take to fully charge with the display showing some what?I have all 4 of mine set to 35% on charging brightness, I doubt if it's noticeable as far as charging time goes. Link to comment Share on other sites More sharing options...
awsum140 Posted February 7, 2016 Report Share Posted February 7, 2016 I have all of mine set at 50% and see no real difference. We're talking only a few milliamps, under ten, for the display, I would guess, so it really shouldn't be a problem. That brightness setting got me with the first DNA200 as well. Link to comment Share on other sites More sharing options...
gninos Posted February 7, 2016 Author Report Share Posted February 7, 2016 The fuse is still green. Link to comment Share on other sites More sharing options...
gninos Posted February 9, 2016 Author Report Share Posted February 9, 2016 Sooooo, can I get some more help troubleshooting this? Please? Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted February 9, 2016 Report Share Posted February 9, 2016 gninos said:Sooooo, can I get some more help troubleshooting this? Please? does escribe recognize the mod? can you connect? what happens when you unplug and plug the batt back in?edit: i responded to your first post and you never reposted..sooooooo Link to comment Share on other sites More sharing options...
gninos Posted February 13, 2016 Author Report Share Posted February 13, 2016 Escribe doesn't respond when I plug it in. I think the chip failed. I am going to check it with a meter tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now