stolis Posted November 13, 2015 Author Report Share Posted November 13, 2015 hey guys since i got my vaporshark while charging it via wall charger 2.1a wont show on the screen the info just only the thunderbolt on the battery icon.when i connect it on escribe and go to device manager everything seems normal.. all cells 4.2 at 9.99Wh fully charged and the other thing is that the battery icon never gets full till the tip!any suggestions what to do? Link to comment Share on other sites More sharing options...
VapingBad Posted November 13, 2015 Report Share Posted November 13, 2015 Are you saying that it does not display while charging, the would be the charging screen brightness in Escribe. If the bar never get full you could reduce the Watt hours in Escribe by a percent or two, you can put the battery percentage, Wh or voltage on the screen as one of the custom fields to see how far below full it is, probably/helpfully only a tiny bit. Link to comment Share on other sites More sharing options...
stolis Posted November 13, 2015 Author Report Share Posted November 13, 2015 we have 2 screens one while its not charging and one while its charging ...the one while charging isn't working it displays the same info as not charging!i have chosen on escribe screen tab charging field 1 battery charge which they won't show up while plugged in 2 battery charge Wh 3 battery packcharging brightness 50% Link to comment Share on other sites More sharing options...
VapingBad Posted November 13, 2015 Report Share Posted November 13, 2015 Have you waited long enough, they don't display until it goes into idle, about 30 sec on mine. Link to comment Share on other sites More sharing options...
DannyK9 Posted November 13, 2015 Report Share Posted November 13, 2015 Mine shows charging after about 2 seconds, I find if I hit the fire button though it interrupts the charging and then comes back after a couple of seconds. If I hit a +/_ button it doesn't effect it. Got mine set to First Line - Ohm Second Line - USB Output Third Line - Wh The battery charging icon stays the same regardless unless you set custom screens AFAIK Link to comment Share on other sites More sharing options...
vandie84 Posted August 24, 2016 Report Share Posted August 24, 2016 Im sorry if out of topic. Is ther any way to change battery icon to percentage Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted August 24, 2016 Report Share Posted August 24, 2016 vandie84 said:Im sorry if out of topic. Is ther any way to change battery icon to percentageyou can select "battery charge %" in "screen" tab of escribe. you cannot replace the batter bar icon with this option tho. it just adds the option you selected to one of your three fields. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now