angelratt Posted May 18, 2016 Author Report Share Posted May 18, 2016 I just received a VT133 as a present. I don't really have an interest in TC and would like to know what the proper settings in Escribe would be for my preferred setup. Are there any specific ecig files I can download for this or can someone share their settings?VT133Kanthal @ 0.5ohmLG HG2 BatteriesAromamizerI may eventually try TC, probably with SS once I get used to this mod. Link to comment Share on other sites More sharing options...
BillW50 Posted May 18, 2016 Report Share Posted May 18, 2016 Thanks to Steve (Wingsfan0310) for creating the case analyzer part.Case Cooling Time Constant: 356.58Case Heating Time Constant: 429.86Case USB Charge Temperature Rise: 6.39ºF+ 17.62ºF/AMinimum Ambient Temperature: -20ºFMaximum Ambient Temperature 110ºF Link to comment Share on other sites More sharing options...
angelratt Posted May 18, 2016 Author Report Share Posted May 18, 2016 BillW50 said:Thanks to Steve (Wingsfan0310) for creating the case analyzer part.Thanks much for those settings. Is there a file specifically for the battery settings? Link to comment Share on other sites More sharing options...
BillW50 Posted May 18, 2016 Report Share Posted May 18, 2016 The batteries depends on the batteries you are using. But the watt-hour calculator should work too. Link to comment Share on other sites More sharing options...
angelratt Posted May 18, 2016 Author Report Share Posted May 18, 2016 BillW50 said:The batteries depends on the batteries you are using. But the watt-hour calculator should work too.Thanks. I'll using LG HG2s so I give the calculator a try. Link to comment Share on other sites More sharing options...
BillW50 Posted May 18, 2016 Report Share Posted May 18, 2016 Great! Remember the pack voltage is 7.4v (3.7v x 2). And use the capacity of one battery, don't add them up. Link to comment Share on other sites More sharing options...
angelratt Posted May 19, 2016 Author Report Share Posted May 19, 2016 BillW50 said:Great! Remember the pack voltage is 7.4v (3.7v x 2). And use the capacity of one battery, don't add them up.Thanks much! You've been very helpful. After playing around for a bit its not so intimidating. Link to comment Share on other sites More sharing options...
BillW50 Posted May 19, 2016 Report Share Posted May 19, 2016 Link to comment Share on other sites More sharing options...
Rdarkness Posted May 23, 2016 Report Share Posted May 23, 2016 In addition to the case analyzer information, does anyone have the mod resistance for the VT133? I've tried a few times to use a bit of copper to check, but the connection is never stable enough for me to get a good number in the atomizer analyzer. Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 23, 2016 Report Share Posted May 23, 2016 While it would be better to check it properly as that can be useful info when looking for a problem you can expect it to be around 0.004 to 0.005 ohms when things are as they should be. Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted May 23, 2016 Report Share Posted May 23, 2016 i'm partial to the 0.004 ohm mod res setting myself. that number has been working just fine on all my 200's except my VS's 0.007 setting, which is what VS put in. left it alone. Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 23, 2016 Report Share Posted May 23, 2016 My last 200 came from a reputable place and the mod resistance was set to 0.02 ohms, they must have copied DJLsb's figures or something.I checked it myself and got 0.004. Just saying. Link to comment Share on other sites More sharing options...
Rdarkness Posted May 24, 2016 Report Share Posted May 24, 2016 Much thanks, it's the little things like the willingness of others and the info they provide that has this forum one of my home pages. Link to comment Share on other sites More sharing options...
mahmood Posted May 25, 2016 Report Share Posted May 25, 2016 I have a HCigar Vt133. I am trying to charge it via USB but it is not charing. I tried with a PSC and also with a 1 AMP plug but didn't charge. It gets recognized by the computer and I can update the firmware but it still doesn't charge. Please advise. Link to comment Share on other sites More sharing options...
BillW50 Posted May 25, 2016 Report Share Posted May 25, 2016 How do you know it isn't charging? The HCigar VT133 comes with the charging screen set to 0% (which is off). First, "Connect and Download Settings" (button) In EScribe under the screen tab, adjust the charging slider to 40% or higher. You can also change on this tab what displays on the screen when it is charging. Don't forget to "Upload Settings to Device" if you make any changes. Link to comment Share on other sites More sharing options...
MikeyConti Posted June 1, 2016 Report Share Posted June 1, 2016 This tool is Great for finding your DNA 200's Mods Resistance http://smokefreemods.webs.com/apps/webstore/products/show/6619269 Link to comment Share on other sites More sharing options...
dcfluegel Posted June 1, 2016 Report Share Posted June 1, 2016 rofl! nice, Mikey - ordered one of those rascals too, a couple days back (right after I caught the vt133 on sale at ecig) Link to comment Share on other sites More sharing options...
MikeyConti Posted June 2, 2016 Report Share Posted June 2, 2016 dcfluegel said:rofl! nice, Mikey - ordered one of those rascals too, a couple days back (right after I caught the vt133 on sale at ecig) Yeah, I didn't feel like making my own lol Volcano tried to say the Lavabox's Resistance was .02 I believe, which is WAY too high!Enjoy the VT133! I got one on the way Link to comment Share on other sites More sharing options...
dleone32 Posted September 11, 2016 Report Share Posted September 11, 2016 BillW50 said:Thanks to Steve (Wingsfan0310) for creating the case analyzer part.Case Cooling Time Constant: 356.58Case Heating Time Constant: 429.86Case USB Charge Temperature Rise: 6.39ºF+ 17.62ºF/AMinimum Ambient Temperature: -20ºFMaximum Ambient Temperature 110ºF Is this a general setting to use for the DNA 200? Should I use it? Link to comment Share on other sites More sharing options...
dwcraig1 Posted September 11, 2016 Report Share Posted September 11, 2016 dleone32 said: Is this a general setting to use for the DNA 200? Should I use it?This is the settings for Steve's Hcigar VT133.What DNA200 mod do you have? Link to comment Share on other sites More sharing options...
dleone32 Posted September 11, 2016 Report Share Posted September 11, 2016 dwcraig1 said:This is the settings for Steve's Hcigar VT133.What DNA200 mod do you have? I have the vt133. Just got it the other day and I'm still trying to figure it out.. It doesn't seem to hit as hard as my fuchai. Set up the watt hours n what not. Link to comment Share on other sites More sharing options...
norwegianvaper Posted September 27, 2016 Report Share Posted September 27, 2016 dwcraig1 said:This is the settings for Steve's Hcigar VT133.What DNA200 mod do you have?I have the VT200 with Li Po, same for me? And the mod resistance is? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now