VapeFM Posted February 18, 2017 Author Report Share Posted February 18, 2017 Hi I am new to the DNA. I have the Therion BF and so far I really love it, but have a question. When I change the wire type it will show ss316 and under that, the wire type. When I choose Kanthal and go back to vaping, the screen shows the ohms ----f and SS . The SS is what I am curious about. I have read and searched but have not found the answer. I have ever used escribe, and honestly don't even know how to set it up. I am going to send the Therion back, I bought it yesterday and the fire button sticks quite a bit. Seems dangerous. Sorry if this is a stupid question. I've been vaping for years but this one has me stumped. I have the Psyclone Hadaly on it and love it but, but recently im getting the check atomizer warning as well. This is my first Therion. Link to comment Share on other sites More sharing options...
retird Posted February 18, 2017 Report Share Posted February 18, 2017 Have you made any changes in EScribe to the screens, profiles, or themes? Link to comment Share on other sites More sharing options...
giz_60 Posted February 18, 2017 Report Share Posted February 18, 2017 You only changed the wire type, not the profile. It is still on the SS profile. Link to comment Share on other sites More sharing options...
Wayneo Posted February 19, 2017 Report Share Posted February 19, 2017 VapeFM said:.... I am going to send the Therion back, I bought it yesterday and the fire button sticks quite a bit. Seems dangerous. Excellent decision considering it's brand new. Link to comment Share on other sites More sharing options...
VapeFM Posted February 20, 2017 Author Report Share Posted February 20, 2017 Hello. Yes I see now what I was doing wrong but I am still having issues. It seems like TC was working most of the time and now it's not. I've occasionally gotten the new cool question but not much anymore. I haven't tackled escribe yet because I don't know how to use it. I've been doing this for so many years and I feel like such a newbie now it's embarrassing. The wire I have is stainless Clapton wire from lightning babes I'm fortunately I don't know if it's 316 L or 403 or what. If I change the material and then I change the profile so that it says the material twice for example it doesn't say stainless steel on the top and titanium on the bottom I still don't got a temperature read and I'm not sure how to reset it so that it's a cold coil I'm not sure why am having such a hard time with this I read the documentation but it's super confusing to me I got I've been doing this for so long and this is just making me feel like an idiot. Link to comment Share on other sites More sharing options...
Wayneo Posted February 20, 2017 Report Share Posted February 20, 2017 VapeFM said:.... The wire I have is stainless Clapton wire from lightning babes I'm fortunately I don't know if it's 316 L or 403 or what. Can't you just go check what type of wire? Either way, both are safe to use in plain ole wattage/power mode.You should be more concerned about that sticking fire button, while still under LostVape's warranty. Good luck. Link to comment Share on other sites More sharing options...
VapeFM Posted February 20, 2017 Author Report Share Posted February 20, 2017 Yeah I think you so much for the help I feel so stupid I'm at the lighting babes website right now trying to figure out what kind of stainless it is and yes you're right the sticking fire button is very irritating I will be returning it and getting it fixed I'm slowly getting this to work I've used time control on the ass ask Chip and other chips just the only DNA 40 I ever had was the original vapor flask thanks for being patient Link to comment Share on other sites More sharing options...
giz_60 Posted February 20, 2017 Report Share Posted February 20, 2017 Are you talking about Lightning Vapes SS clapton wire? If so, then according to the .csv files that they provide for their wire, it is 316L Link to comment Share on other sites More sharing options...
VapeFM Posted February 20, 2017 Author Report Share Posted February 20, 2017 Yup I am. Ok I'll give that a shot. As far as the not baby and temperature mode I just really like things to work correctly and sometimes I like temperature mode whenever I'm feeling a little paranoid about sheet and juice chemicals. Link to comment Share on other sites More sharing options...
VapeFM Posted February 20, 2017 Author Report Share Posted February 20, 2017 It looks like to use colors I have two purple spots on mine so I don't think it's 316L Link to comment Share on other sites More sharing options...
giz_60 Posted February 20, 2017 Report Share Posted February 20, 2017 If it has 2 purple dots, then that indicates that the core & the wrap are both SS & according to the .csv file that is downloadable from their website for that wire, compared to the Steam Engine .csv...that is 316L Link to comment Share on other sites More sharing options...
VapeFM Posted February 20, 2017 Author Report Share Posted February 20, 2017 Great I'll hide it a shot. I noticed on my packaging it doesn't say premium 316L so that's my confusion. Well some of my confusion Link to comment Share on other sites More sharing options...
txmonkey214 Posted February 20, 2017 Report Share Posted February 20, 2017 Did you try using electronic lubricant? My down button was stuck on my older Hana V200. Lube worked well on that button. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now