adam8178 Posted March 24, 2017 Author Report Posted March 24, 2017 My hcigar 133 has been draining my batteries very quickly. Then just last night it started to fire in my pocket and the only way to stop it was take batteries out. I put them back in and it started to fire again I took them out and now no matter what batteries I put in it won't turn on.
giz_60 Posted March 24, 2017 Report Posted March 24, 2017 Can you post a screen shot of 'Device Monitor'...it will give better insight as to what may be happening...
txmonkey214 Posted March 24, 2017 Report Posted March 24, 2017 I would recommend buying a can of CRC 2-26 electronics lubricant, and spraying all of the buttons on your mod. Just squirt a little in the side, and click it several times, wiping away excess fluid with a kleenex, or whatever. I have had the down (-) button stick on my mods, on two occasions. Both times, I was able to free them up, by using 2-26. This sort of thing just happens, when enough junk builds up in the buttons. Even if it wasn't autofiring, it could still draw current, and drain your batteries.
adam8178 Posted March 24, 2017 Author Report Posted March 24, 2017 I can't connect it said device in use no it saying failed to open serial port
giz_60 Posted March 24, 2017 Report Posted March 24, 2017 Close out all Escribe windows & restart...sounds like something in Escribe was connected to the device...
adam8178 Posted March 24, 2017 Author Report Posted March 24, 2017 Note it says can't figure out device version
giz_60 Posted March 24, 2017 Report Posted March 24, 2017 I've seen that message before. I believe the way I got it to work again, and it took a few tries, was to close out all of Escribe, unplug device, open Escribe & select the correct version for device & then reconnect the device & let Escribe find it...IIRC, it took 3 tries before it worked...
adam8178 Posted March 24, 2017 Author Report Posted March 24, 2017 Can you still connect to escribe with out batteries in the mod
dwcraig1 Posted March 24, 2017 Report Posted March 24, 2017 YesAll EScribe capable boards will connect to EScribe with just USB cable.On the DNA250 it will connect but the screen will not work without batteries.Edit: I'm not sure about the DNA60. 1
adam8178 Posted March 24, 2017 Author Report Posted March 24, 2017 Nothing has worked. Screen is black and won't connect to escribe says can't figure out device version
adam8178 Posted March 25, 2017 Author Report Posted March 25, 2017 Is there a reset on the mod anywhere?
Spector NS5 RD Posted March 25, 2017 Report Posted March 25, 2017 adam8178 said:Is there a reset on the mod anywhere? on the mod no (you can pull the cells out). in EScribe yes.
Spector NS5 RD Posted March 26, 2017 Report Posted March 26, 2017 board's probably gone. does anything happen if you plug in a USB cable that's connected to a charger?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now