Battery Setting

[Cotay]

It appears that permissions aren't properly set to download the Datasheet. I've verified my account but the link states "you don't have permission to perform this action".

[magerb]

Same here.

[Justin]

I checked the permissions and don't see anything that would prevent you from downloading the attachment.  Did you verify your email address?

[Cotay]

Thanks Justin.  The .pdf still doesn't work, but your link worked fine.  My email address has been verified and the other downloads to the beta enclosure and board files work fine.

EDIT: The .pdf is now working as well.

[magerb]

I have the exact same issues. I did verify my email, still no go. Thanks for the link, it works fine!

Michael

[Phone Guy]

It downloaded for me in my phone.

[AlenDjuderija]

Jup i have same problem guys, we cant download its like on uk-ecig forrum when you dont have acc and you cant see sh***

[FJAS]

I just downloaded it and opens fine

[copyman]

Everything is working normally ...

[Jakeatadvance]

so, (and please dont stab me if im completly wrong) but according the graph, you can fire .01ohms? or is it still .05?

[John]

You can fire into .01, but it will current limit to 25 watts output with kanthal, or maybe 50 watts once a nickel coil has heated up (and somewhere in between for things in between like twisted nickel/kanthal and titanium)

Also you'd really need to nail your mod and tank resistance readings to temperature control properly down that low, so it is a touch impractical to use a coil that low. Possible, but not great results. 

[Mad Scientist]

I know this is a dumb question, but for the balance connector, the drawings seem to show the "slot" down (farther from the USB) but the photos show the "slot" up (closer to the USB). Am I missing something? My eyesight isn't what it once was so maybe the connector is marked somewhere but anyway, which way does it go? Thanks.

[Brandon]

The Data sheet shows 3 possible orientations for the balance connector.  If you are mounting using the through holes, the slot goes down (farther from the USB).

[Mad Scientist]

Brandon said:

The Data sheet shows 3 possible orientations for the balance connector.  If you are mounting using the through holes, the slot goes down (farther from the USB).

Thank you!

[iamiam]

Just got my VT75 today. I went through the tutorial but don't see anything about battery setting. Do I need to input battery information anywhere if I'm sing a 18650?

[Spector NS5 RD]

under the mod tab in escribe make sure you have lithium ion 18650 selected and set your cell soft cutoff to not less than 2.6
if you want to to input the watt hour of a battery, run battery analyzer. there's a box you can also check if you plan to use an external battery charger.

[VapingBad]

I don't bother changing any of the battery settings and it works well with 25Rs.

[Mangiman]

This new chip runs on 3s LiPo or 2s or 1s ???

[awsum140]

The DNA75 runs on a 3.7 supply voltage, 1s.

[iamiam]

ChunkyButt200 said:

under the mod tab in escribe make sure you have lithium ion 18650 selected and set your cell soft cutoff to not less than 2.6
if you want to to input the watt hour of a battery, run battery analyzer. there's a box you can also check if you plan to use an external battery charger.

Thank you . There was a "Manufacturer Settings" under the Mod tab which I missed the first few times. I'm using Sammy 30Q with the cutoff value of 3V and Max Input @ 20A and Pulse Input of 30A. Or is there a list somewhere of all manufacturer specs?

[Mangiman]

Anybody knows where to get a LiPo 1s with xt60 connector and does the micro usb port on board will charge it?

[Spector NS5 RD]

Mangiman said:

Anybody knows where to get a LiPo 1s with xt60 connector and does the micro usb port on board will charge it?

www.hobbyking.com has lipos and connectors. the dna 75 has an on board 1 amp charger that is powered from the micro usb port.

[Mangiman]

Can i use a 6400 MAH 1s LiPo with 90c or should be below 90c?

[Spector NS5 RD]

Mangiman said:

Can i use a 6400 MAH 1s LiPo with 90c or should be below 90c?

you could use that lipo. the 90c rating is fine, overkill, but fine. the board only draws 30 amps max. a 30c will even do. but yes the lipo you asking about WILL work.

[olafeone]

Can anyone tell me what to put in VT75 for my AWT 26650 3.7V 4500mAh 75 A battery plz ?