Jump to content
Evolv DNA Forum

Wayneo

Moderators
 View Profile  See their activity

  • Posts

    2,353

  • Joined

  • Days Won

    401

 Content Type 

Posts posted by Wayneo

  5. Do i need to update the firmware on my Hadron Pro?

    in EScribe, Software and Firmware

    Posted

    At a minimum you should update to that version(SP33), BUT the international version which offers more features.

    SP33 had a much shorter timer before your mod went to sleep ~1 hour. Versions after that and the current will sleep at the 24 hours of no use. Overnight your batteries will lose .1V per cell with SP55.

    You can read what updates were done at each version here;
    https://forum.evolvapor.com/topic/66731-early-firmware-and-escribe-suite/

    • Like 1

  6. Replay issues with high variable resistance coil

    in Replay and Atomizers

    Posted

    36 minutes ago, Malango said:

    ... and i accidentally twisted a leg.

    So why not just remove a wrap to fix it?

    38 minutes ago, Malango said:

    .268 ~ .357 ss316l 26gx2 36gx1

    Where are you seeing this?

    39 minutes ago, Malango said:

    If I set the coil resistance

    The coil resistance is what is read by the mod. You should not set it manually. After you figure out what you're gonna do, when the coil is back at an ambient temperature run Atomizer Analyzer and tell me how much fluctuation you see.

    • Like 1

  7. is my mod normal or not?

    in General Discussion

    Posted

    9 minutes ago, Artemius said:

    Yes, I put it .185Ω manually

    I hope you now realize not to do that.

    10 minutes ago, Artemius said:

    But why does my mod read .245Ω when I use the "Measure Ohms" feature?

    No idea, I think it was done by you, but doesn't matter, you see it fired at .196Ω as I have already explained.

  8. is my mod normal or not?

    in General Discussion

    Posted

    Thank you for the earlier screenshots, it makes troubleshooting/helping much easier. 

    I think there's a problem with how it read that .245Ω's as it's clearly a .196Ω coil, and how it read .185Ω. Did you manually put it there?

    Look at your 1st pic, what do the live ohms show, Look at your 2nd pic, what do the live ohms show?
    .196Ω and .197-.196Ω You have a .196Ω coil.

    The coil resistance is read by the mod. A poor connection by the trapping of the wire, or dirty connections on the mod or atty can affect the reading. BUT, no matter what you change it to or think, when you hit that fire button, the mod reads the live resistance, as it should.

    Your mod is normal.

  11. DNA 100C Wattage drop after 3 puffs. (Geekvape z100c p Coils)

    in General Discussion

    Posted

    1 hour ago, trucknuts said:

    I've played around with replay a bit but never found it useful compared to what TC offers between temp and wattage inputs (at least not in SS). Definitely an under-explored feature for me though so if you have any pointers on better usage of it please do.

    Sure. First start off in the Replay profile, material 'watts'. Warmth set at 1, Punch at 5. Find the ideal watts you could vape all day. If you want it to ramp quicker/slower adjust that Punch value up or down. When you get a great puff, enable replay. You'll get a much fuller puff. Try that for a couple days and let me know what you think. Like TC, start with an ambient/cold coil. No material files to worry about or room temp.

    EDIT: I've been told by a most respected source those 'P Coils' will ALSO Replay if under Mod->Safety you change that option to 'allow on unlikely' using the same parameters as above.

    • Like 1

  12. DNA 100C Wattage drop after 3 puffs. (Geekvape z100c p Coils)

    in General Discussion

    Posted

    38 minutes ago, trucknuts said:

    Support indicated this was a safety feature when the boost buck overheats.

    I would certainly agree with support as they have access internally with the designers and developers.

    My main concern was with your puff screenshot. You're asking a whole lot from that single battery board with a boost buck converter. As you can see, your power (green squiggly line) plunges after hitting that 100 watt peak, never really leveling out. So it ends up being a weak puff after that initial burst of power.

    Is your main reason/benefit for using TC to stop you from going over 450°F or for 'dry hit' prevention. Your current preheat parameters does nothing. 

    If it's for specific, I can make suggestions for a better puff.
    If it's for dry hit prevention I can help you with trying 'Replay'.

    • Like 1

  14. Should i be worried ? DNA250C

    in General Discussion

    Posted

    Hi hopes, but doesn't sound like a board problem. Hopefully SV looks after it.

    Bill, I just looked it up, over there 😉 while complaining about my 2 POS Paranormals. It was Jan 5, 2019, my 4s Lipo running SP38 I said "I have 2 Non C LiPO's that maintain their voltages for weeks. My one 4S LiPO Color mod drains about 3% over a 24 hour period of not being used." Which was only .1V per cell.

    Now that we know of that long period before sleep, I still run the latest firmware so the mod doesn't re-read all working parameters like SP33 has to.

    • Like 1

  15. Dovpo Odin 100 Mod Firmware Update

    in General Discussion

    Posted

    His DNA75C can actually boost to 100 watts with the right battery setup. If your mod has boost (sometimes called soft, normal, hard) you can do that with yours. Part of the beauty of the DNA with escribe is that you can actually see your mod performance, and have a good one year warranty on the board.

    Now if he could get Stainless Steel Mesh (VandyVape) he could use Watt boost and replay, and never get a dry mesh puff. I hear they are pretty nasty.

    No matter what you do, enjoy your mod.

    • Like 2

  16. Dovpo Odin 100 Mod Firmware Update

    in General Discussion

    Posted

    It says right there in the product description "...............The Odin 100 is equipped with the DOVPO chipset"

    1 hour ago, LacocoRoco said:

    could i probably replace it with the Evolv DNA 100 Color?

    You'd need to measure from the center of the bottom actuator to the center of the usb and if it's about 8mm then a swap would probably work. IF you want to use Replay or temperature control then you might want a DNA. If you're just a straight watts user ... save your money.

    • Like 2

  21. DNA 250C Screen Brightness

    in General Discussion

    Posted

    There are pictures in this link. 
    https://forum.evolvapor.com/topic/71319-how-to-change-a-screen-on-lostvape-paranormal/?tab=comments#comment-934609
    The cover hinges at each side where the ribbon goes underneath the connector. Go to the opposite end, and lift/push the cover towards the ribbon. I think I've used a fingernail or tweezer at the edge of the cover. It will stand vertical to the board.

    Make sure to slide the new cable in straight and far enough. When you push that cover down, you'll hear/feel it click in.

    • Like 1

  22. DNA 250C Screen Brightness

    in General Discussion

    Posted

    10 minutes ago, Vapors Tongue said:

    i suppose the screens are attached by a ribbon to the board. so unplug one and plug the other in

    It's that easy once you get to the front of the board. It's late, I'll write it up in the a.m for you. Or user jacobevolv has pictures if you search his content. What kind of mod?

    • Like 1
×
×
  • Create New...