Pigsy Posted October 27, 2020 Report Share Posted October 27, 2020 I recently bought a Prisma DNA 75c, i have downloaded the Evlolv replay theme on to it. My problem is once it has locked i unlock it and everytime it shows check atomiser from 2 to 5 times then it will fire and be ok until it locks again. I have checked the atty is tight and tried other atties aswell but still does the same thing, I downloaded another theme to check it wasnt that and i am now stumped. Any help would be much appreciated please. Link to comment Share on other sites More sharing options...
Podunk Steam Posted October 27, 2020 Report Share Posted October 27, 2020 (edited) Clearo atty? Coil material? Mod resistance set? Ohms read from a room temp mod and atty? Clean battery contacts? Edited October 27, 2020 by Podunk Steam Because we like you 2 Link to comment Share on other sites More sharing options...
dwcraig1 Posted October 28, 2020 Report Share Posted October 28, 2020 Try using Atomizer Analyzer in EScribe to see if atty has a connection or not and post findings. 2 Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/27/2020 at 11:07 PM, Podunk Steam said: Clearo atty? Coil material? Mod resistance set? Ohms read from a room temp mod and atty? Clean battery contacts? Expand The atty is a 24mm Dvarw The coil is a MTL clapton all ni80 (pc coils) Sorry how would i find room temp for mod & atty ? Battery contacts are all clean. Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 2:15 AM, dwcraig1 said: Try using Atomizer Analyzer in EScribe to see if atty has a connection or not and post findings. Expand Will do this when i get home from work, should i do this before i fire the mod ? Sorry don't know how to post findings but will have a look. Link to comment Share on other sites More sharing options...
Wayneo Posted October 28, 2020 Report Share Posted October 28, 2020 On 10/28/2020 at 11:20 AM, Pigsy said: should i do this before i fire the mod ? Sorry don't know how to post findings but will have a look. Expand Shouldn't matter with N80, but I'd do it before. Let us know if the ohms fluctuates, and how much. Did this always happen, since new? 1 Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 11:30 AM, Wayneo said: Shouldn't matter with N80, but I'd do it before. Let us know if the ohms fluctuates, and how much. Did this always happen, since new? Expand I thought it best to do it before as thats when the problem is. Yes this has happened from day one, only had it 6 weeks. Thought it maybe the theme so changed it as i wasn't keen on it anyway. Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 Ok i done the atomizer analyzer before firing it.... Ohms 1.067 Raw Ohms 1.071 Mod Resistance 0.004 Room Temp 67.41°F When fired showed the check atomiser twice and now works fine, hope this helps. Link to comment Share on other sites More sharing options...
dwcraig1 Posted October 28, 2020 Report Share Posted October 28, 2020 It is not meant to fix anything just info. Do this: Start Atomizer with no atty. Now start screwing in atty. Note how many turns or partial turns from where Atomizer Analyzer starts reading ohms till it's screwed in all the way. 1 Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 4:50 PM, dwcraig1 said: It is not meant to fix anything just info. Do this: Start Atomizer with no atty. Now start screwing in atty. Note how many turns or partial turns from where Atomizer Analyzer starts reading ohms till it's screwed in all the way. Expand It goes in one full turn then starts reading ohms, reads 1.2 ohms and all the way in it reads 1.076 1 Link to comment Share on other sites More sharing options...
Podunk Steam Posted October 28, 2020 Report Share Posted October 28, 2020 (edited) On 10/28/2020 at 11:17 AM, Pigsy said: The atty is a 24mm Dvarw The coil is a MTL clapton all ni80 (pc coils) Sorry how would i find room temp for mod & atty ? Battery contacts are all clean. Expand Try using temperature sensing capable wire for your coils. Edited October 28, 2020 by Podunk Steam Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 7:41 PM, Podunk Steam said: Try using temperature sensing capable wire for your coils. Expand I don't have replay turned on in escribe for that profile ! Link to comment Share on other sites More sharing options...
Podunk Steam Posted October 28, 2020 Report Share Posted October 28, 2020 (edited) On 10/28/2020 at 8:32 PM, Pigsy said: I don't have replay turned on in escribe for that profile ! Expand Your first post mentions Replay. On 10/27/2020 at 8:05 PM, Pigsy said: I recently bought a Prisma DNA 75c, i have downloaded the Evlolv replay theme on to it. My problem is once it has locked i unlock it and everytime it shows check atomiser from 2 to 5 times then it will fire and be ok until it locks again. I have checked the atty is tight and tried other atties aswell but still does the same thing, I downloaded another theme to check it wasnt that and i am now stumped. Any help would be much appreciated please. Expand Earlier I mentioned room temperature. Your atty and mod should be at room temperature when reading the ohms resistance for the first time the atomizer is connected to the mod. Edited October 28, 2020 by Podunk Steam Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 8:36 PM, Podunk Steam said: Your first post mentions Replay. Expand Yes i dowloaded the theme so i had replay if i wanted to use it but in the watts profile i use for n80 i disable replay, Sorry for the confusion will edit post. Link to comment Share on other sites More sharing options...
Podunk Steam Posted October 28, 2020 Report Share Posted October 28, 2020 On 10/28/2020 at 8:42 PM, Pigsy said: Yes i dowloaded the theme so i had replay if i wanted to use it but in the watts profile i use for n80 i disable replay, Sorry for the confusion will edit post. Expand No worries, with so many variables I try to take in all information. My best guess at this point would be a cold or incorrect solder joint. I'm not familiar with this particular mod and its construction as to be able to look at the solder work done. As well as making sure your coil connections are firmly fastened may avoid looking into the mod itself. 1 Link to comment Share on other sites More sharing options...
Pigsy Posted October 28, 2020 Author Report Share Posted October 28, 2020 On 10/28/2020 at 8:55 PM, Podunk Steam said: No worries, with so many variables I try to take in all information. My best guess at this point would be a cold or incorrect solder joint. I'm not familiar with this particular mod and its construction as to be able to look at the solder work done. As well as making sure your coil connections are firmly fastened may avoid looking into the mod itself. Expand Im not the best person to be able to explain a problem and should of put in more information, i have heard of a cold solder joint in the past, hoping its not that. i have attached a picture ( hopefully it works) of the mod. Shame because its a great mod. Thank-you for your time 😊 C0291407-B97A-4676-AE09-C50C68A7D769.webpFetching info... Link to comment Share on other sites More sharing options...
Podunk Steam Posted October 28, 2020 Report Share Posted October 28, 2020 On 10/28/2020 at 9:09 PM, Pigsy said: Im not the best person to be able to explain a problem and should of put in more information, i have heard of a cold solder joint in the past, hoping its not that. i have attached a picture ( hopefully it works) of the mod. Shame because its a great mod. Thank-you for your time 😊 C0291407-B97A-4676-AE09-C50C68A7D769.webp 5.13 kB · 2 downloads Expand I didn't read into the thread but it may help you being it states resistance issues. I'm familiar with the look of these mods and it's a subjective thing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now