Voodoo Posted July 2, 2020 Report Share Posted July 2, 2020 Got a brand new Vicious ant club omega dna75c bought from my local dealer which I already have talked to and they are just as lost as me. When I build with any wire like 0.20 it turn out 0.40 when I mount atty on mod. Same happen with any ohm build and also many times get "temp control" or "new atomizer -yes/no". Even when ohm is locked (red lock). I have tried everything except for taking mod apart. I think chip was DOA and have to be changed, if so mod have to be shipped from Europe to Philippines to change chip on warranty and that will take maybe a month til I get mod back. How is customers service at VA - long waiting time or do they express service cuz it's a warranty case? Am I wrong or do anybody know what to do? Appreciate help thanks. Link to comment Share on other sites More sharing options...
retird Posted July 2, 2020 Report Share Posted July 2, 2020 So you have also tried a different atty and you took an ohm reading of the atty (coil installed) before attaching the atty to the device? Some atty's by design don't work well with DNA's... just a thought.... Link to comment Share on other sites More sharing options...
Voodoo Posted July 2, 2020 Author Report Share Posted July 2, 2020 Yeah tried different wire/premaid and different attys like Apex, Hadaly, Rebirth etc. And build on ohm meter, different mods for a couple of weeks. I would say I tried everything except takin mod apart. Also lately get message "Temp control" a couple of times each day. I vape watt 30-65 punch 9 also boost 45-65 with lower watt. Link to comment Share on other sites More sharing options...
retird Posted July 2, 2020 Report Share Posted July 2, 2020 Yep Temp Control just means you have reached the desired temperature and the DNA is regulating the temperature..... you are using spaced coils right?? Link to comment Share on other sites More sharing options...
Voodoo Posted July 2, 2020 Author Report Share Posted July 2, 2020 Never but I tried it too and only do watt therefore I should not get that message, especially in the morning when the mod have been off. I am pretty sure chip was DOA Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 2, 2020 Report Share Posted July 2, 2020 My thoughts is that the wiring is the problem, the 510's positive or it's chassis ground. Regardless it should be returned to place of purchase. Well it doesn't have a regular 510 so the output or ground for the atty. 1 Link to comment Share on other sites More sharing options...
Voodoo Posted July 2, 2020 Author Report Share Posted July 2, 2020 It could be connection problem between atomizer slug and the circuit board. the positive pin may not be and make clean along with the corresponding positive plate in the mod. Is this what you mean? Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 2, 2020 Report Share Posted July 2, 2020 As far as I know VA only handles warranty on products purchased directly from them, otherwise where it was purchased from handles it . Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 2, 2020 Report Share Posted July 2, 2020 3 minutes ago, Voodoo said: It could be connection problem between atomizer slug and the circuit board. the positive pin may not be and make clean along with the corresponding positive plate in the mod. Is this what you mean? I doubt very much that the board is the problem though anything is possible I guess. Link to comment Share on other sites More sharing options...
Voodoo Posted July 2, 2020 Author Report Share Posted July 2, 2020 I bought it at my local dealer which are reputable and have spoken to them so warranty is no problem I just wanted to see if it could be fixed in my country so I don't have to wait a month to get it back. Dealer don't fix they send to Philippines and how they deal is not my problem which they have confirmed. Thanks I thought it was DOA all the time it's going to Philippines Monday Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 2, 2020 Report Share Posted July 2, 2020 Do your board and room temps look reasonable? Link to comment Share on other sites More sharing options...
Voodoo Posted July 2, 2020 Author Report Share Posted July 2, 2020 Yes. It's definitely connection problem or board problems DOA. Thanks Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 2, 2020 Report Share Posted July 2, 2020 1 minute ago, Voodoo said: I bought it at my local dealer which are reputable and have spoken to them so warranty is no problem I just wanted to see if it could be fixed in my country so I don't have to wait a month to get it back. Dealer don't fix they send to Philippines and how they deal is not my problem which they have confirmed. Thanks I thought it was DOA all the time it's going to Philippines Monday That is correct. I have a DNA75C Spade and it has the highest mod resistance by far, works well though. It's somethog like 0.02 ohm where all my others are around 0.004. Link to comment Share on other sites More sharing options...
ToddB130 Posted November 2, 2020 Report Share Posted November 2, 2020 I'm having just about the same issue. I just bought an odin mini dna 75c and the ohms are 0 2 too high every single coil build or tank i put on it. Also everytime I hit the refresh button it fluctuates in a range thats .2 too high. The coil for my tank says it should read 0.2 and it does on all my other mods but this one it shows 0.4 I hit refresh it shows 0.41 hit refresh again 0.39 again 0.38 and so on. This is my first DNA mod also. Also I keep getting a message that says temp protect (which I think the person who wrote this ment to say but he said temp control) but its the same coil same tank that works fine on all other mods no temp issues. Ice also tried other tanks and my rta with builds but its always 0.2 over. Should I send it to dovpo for warranty? Super butthurt about this man I live this device and what to use it so bad but am so frustrated at it giving me these issues and I mean this things not cheap and now I have to wait what a month to get a working one? All my 20-40 dollar smok mods have been 100 reliable and accurate why is this expensive chip not?? The first couple pics are just showing the fluctuating ohms that are 0.2 to high and how much they fluctuate. Link to comment Share on other sites More sharing options...
reda muhammed Posted March 15, 2021 Report Share Posted March 15, 2021 I also have the same problem (I bought an Odin MiniDNA 75C Mod) 10 days ago and the resistance reading changes constantly and is not fixed at 0.2 and sometimes 0.3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now