BonesStark Posted April 9, 2019 Report Posted April 9, 2019 Ok, So my Orion Go "bricked" after about 6 months. I was able to do a hard reset to it. It will now charge, show the battery level with 2 fire button clicks. Escribe recognizes it no problem and it will lock and unlock with 5 clicks. However! when I try and fire is (unlocked) or change the wattage with the settings button I get 4 red (not purple... Dark red) flashes. Does anyone know WHAT this means?!? I have searched the furthest reaches of the internet and found nothing... Help!
dwcraig1 Posted April 9, 2019 Report Posted April 9, 2019 That sounds like what it will do when then battery is too low to operate it. Perhaps the battery is at fault, check the voltage drop using EScribe's Device Monitor.
BonesStark Posted April 9, 2019 Author Report Posted April 9, 2019 Device Mon doesn't show it firing at all. Almost has if the actual "fire" function is disabled. It is now showing "check battery" at the bottom.
BonesStark Posted April 9, 2019 Author Report Posted April 9, 2019 Yeah, 5.5 and it shows the charge level at 100%
dwcraig1 Posted April 9, 2019 Report Posted April 9, 2019 Full charge on a LiPo is 4.2 so if that's correct there is a major problem. Go here for help with it: https://helpdesk.evolvapor.com/index.php?a=add&category=1
BonesStark Posted April 9, 2019 Author Report Posted April 9, 2019 If the max charge is 4.2 how could even be reading at a 5. the device is totally cold to the touch so I no it cant actually be over charged...
retird Posted April 9, 2019 Report Posted April 9, 2019 Can you post a screenshot of Device Monitor with the device plugged in?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now