skineedog Posted August 22, 2018 Report Share Posted August 22, 2018 Does anyone know what enclosure was used in this video of Brandon (Evolv) and Daniel (DJLsbVapes) discussing the 250C? Link to comment Share on other sites More sharing options...
retird Posted August 22, 2018 Report Share Posted August 22, 2018 Those devices were only used during Alpha/beta testing of the board, software, and firmware. Evolv made and used them for testing purposes only. They use a 4-cell Li-Po pack. I don't know of anyone marketing an enclosure like it, or similar to it. Googled Evolv DNA400 and saw this: https://www.def-liquids.com/product-p/def400.htm Link to comment Share on other sites More sharing options...
skineedog Posted August 22, 2018 Author Report Share Posted August 22, 2018 Oh, they're out there. I've built two so far. I just liked that enclosure because it is smallish and unfinished. Plus, it looks like it used screws to secure the enclosure rather than magnets. Oh, and I like the buttons better too. Most of the 75C/250C enclosures other there use plain round buttons and I prefer either square or rectanglish buttons. If you're interested, check these out. I like the dripp3d enclosure better. It's slightly heavier but, very well made and a better design in my opinion. And no magnets!.... http://dripp3d.com/LARGE-DNA250C-CURVE-CNC-Anodized-Aluminum-Enclosure/ https://www.stealthvape.co.uk/NLS-G5-DNA250C-12MM-BLACK?filter_name=dna250c Link to comment Share on other sites More sharing options...
retird Posted August 22, 2018 Report Share Posted August 22, 2018 Yep there are enclosures out there but I've not seen one like the one you asked about or one similar to it. The size is approximately (H)3 5/8" x (W) 1 1/8" x (D) 1.5" and the front is curved with a recessed 510 Evolv connector. Usually after market ERM enclosures become available that are approximately the same as the Evolv ones used for testing (such as the ERM for the DNA75, 75C, 200, 250) but I haven't seen any yet for 4 cell DNA250C. If they are out there maybe someone can post a link.... then both of us could build one..... I'm not big on magnets either and like square buttons.... So you can compare size the second link you posted shows a box size of 4.9" (H) x 1.45" (W) x 2.6" (D) and the first link is just a tad smaller but both are much bigger than the one you asked about..... Link to comment Share on other sites More sharing options...
dwcraig1 Posted August 22, 2018 Report Share Posted August 22, 2018 I want one of those little buggers too, nothing else will do. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now