iambyrdman Posted April 24, 2018 Report Share Posted April 24, 2018 I built my own DNA250C box but replay didn't work. Figured it was my install. It would be nice if I could get a reply to my RMA request from a week ago!!! So I bought a Paranormal 250C. But replay doesn't work on it either!!! WTF I'm using 316L or 304 SS wire. Neither work!!! Horrible fail!!! Only thing I've changed is decimal places and step size for watts and temperature. Replay should work out of the box. It shouldn't be difficult Link to comment Share on other sites More sharing options...
iambyrdman Posted April 24, 2018 Author Report Share Posted April 24, 2018 (edited) So I had time to run battery analyzer and replay started to show up when I took the first vape after running it. But the replay was nothing. Like it was getting NO wattage at all. Nothing even though it says, 'playing' This is on the Paranormal 250C, fresh out of the box. I got 2 but was hoping to leave the second unopened but I'm tempted to see if I get the same crappy results . Have I mentioned, "Horrible FAIL" It should work 'out of the box' so grandma could work it... Without EScribe even! Edited April 24, 2018 by iambyrdman Link to comment Share on other sites More sharing options...
iambyrdman Posted April 24, 2018 Author Report Share Posted April 24, 2018 Actually, I just noticed it's getting NO power because I'm getting a, "Check Atomizer" warning when I try to "Play" the replay Fresh out of the box Paranormal DNA250C. Awful Fail! Link to comment Share on other sites More sharing options...
iambyrdman Posted April 24, 2018 Author Report Share Posted April 24, 2018 and I only get "Replay" one time. Ever other vape after the first does not generate a "replay" option. Nick? Any help??? I'm on my 3rd failed attempt at replay and this time it's a retail unit!!! Big time FAIL Link to comment Share on other sites More sharing options...
retird Posted April 24, 2018 Report Share Posted April 24, 2018 Check Atomizer: The DNA has detected a large resistance change during operation, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting. Battery Analyzer has nothing to do with Replay AFAIK...... If you want we can try to see what is happening. But we need more information please.... First questions.... Have you owned any other DNA devices prior to these? Which ones....? Link to comment Share on other sites More sharing options...
iambyrdman Posted April 24, 2018 Author Report Share Posted April 24, 2018 On 4/24/2018 at 11:09 PM, retird said: First questions.... Have you owned any other DNA devices prior to these? Which ones....? Expand Yes, I own: 2x Wismec Reuleaux 1x Therion BF DNA75C 2x Boards I pick up in person from the Evolv factory down the street from my house... & 2x Parnormal 250C and I'm about the biggest computer tech geek you've ever known so I understand how data n stuff works. It should work out of the box! Or tell you why it's not... I have tried several RDTA tanks and RBAs, all built with 316L. I've also tested a SMOK product with 304SS, same result I think but less testing. 1 minute ago, retird said: Expand Link to comment Share on other sites More sharing options...
iambyrdman Posted April 24, 2018 Author Report Share Posted April 24, 2018 On 4/24/2018 at 11:16 PM, iambyrdman said: 2x Boards I pick up in person from the Evolv factory down the street from my house... Expand I finished the install for one of them with the same result but the install may have been bad because I used a common ground when I couldn't use the output ground. Still waiting on an RMA request reply, no word after a week! Link to comment Share on other sites More sharing options...
retird Posted April 24, 2018 Report Share Posted April 24, 2018 OK..... If you want we can do a few things to see if we can get you going.... I assume you build your own coils.... Take your atty with the SS316L build and put it on the 75C and see if it vapes in TC mode. This will tell us that the build should work on the 250C... Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 24, 2018 Report Share Posted April 24, 2018 I've a Paranormal DNA 250c which was doing good and then i lost the Replay mode , and when i went for restore defaults from escribe it keeps telling me " check battery " . what happened and how can this be fixed ?!!!!! Link to comment Share on other sites More sharing options...
retird Posted April 24, 2018 Report Share Posted April 24, 2018 On 4/24/2018 at 11:34 PM, drmaz2000 said: I've a Paranormal DNA 250c which was doing good and then i lost the Replay mode , and when i went for restore defaults from escribe it keeps telling me " check battery " . what happened and how can this be fixed ?!!!!! Expand You restored the Default Evolv file probably. You need to go into the Mod Tab and see what the Battery setting is set to..... A 2 cell device should be set to 2 and not 4 cells (default Evolv setting). See if that gets you going... Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 24, 2018 Report Share Posted April 24, 2018 Thanks Bro .. as u said it was set for 4 cells .. But still there no active Replay mode !! Link to comment Share on other sites More sharing options...
retird Posted April 24, 2018 Report Share Posted April 24, 2018 Yep the 250C defaults to 4 cells and the 200 to 3 cells... What were you doing when you lost Replay? Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 25, 2018 Report Share Posted April 25, 2018 On 4/24/2018 at 11:55 PM, retird said: Yep the 250C defaults to 4 cells and the 200 to 3 cells... What were you doing when you lost Replay? Expand it was working for some time at first when i got the mod but then after i changed some theme settings it stopped working .. that's why i did restore defaults settings hope it would work again !! Link to comment Share on other sites More sharing options...
iambyrdman Posted April 25, 2018 Author Report Share Posted April 25, 2018 On 4/24/2018 at 11:22 PM, retird said: OK..... If you want we can do a few things to see if we can get you going.... I assume you build your own coils.... Take your atty with the SS316L build and put it on the 75C and see if it vapes in TC mode. This will tell us that the build should work on the 250C... Expand On 4/24/2018 at 11:22 PM, retird said: Expand You are so Awesome to help all personal like n stuff. Here is Device monitor of the 75C with the coil we'll be working with. Again, 316L. It went a little above set temp the second pull but I may have slowed the air at the end there. Link to comment Share on other sites More sharing options...
retird Posted April 25, 2018 Report Share Posted April 25, 2018 On 4/25/2018 at 12:00 AM, drmaz2000 said: it was working for some time at first when i got the mod but then after i changed some theme settings it stopped working .. that's why i did restore defaults settings hope it would work again !! Expand OK.... probably the changes in the theme could have done it.... You now have the Evolv theme I think so make sure the Profile is set to the Replay Profile and make sure Support Replay is checked in the Profile setting... see if that gets you going.... Link to comment Share on other sites More sharing options...
retird Posted April 25, 2018 Report Share Posted April 25, 2018 @iambyrdman....... What-a coil...... so it works on the 75C in TC mode.... now does it work in TC mode on the 250c devices also? Can we see a Screen shot of one of the 250C's vaping that atty in TC mode..? Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 25, 2018 Report Share Posted April 25, 2018 On 4/25/2018 at 12:04 AM, retird said: OK.... probably the changes in the theme could have done it.... You now have the Evolv theme I think so make sure the Profile is set to the Replay Profile and make sure Support Replay is checked in the Profile setting... see if that gets you going.... Expand It's only showing this now .. Link to comment Share on other sites More sharing options...
retird Posted April 25, 2018 Report Share Posted April 25, 2018 @drmaz2000...... Correction...... That is the Profile you are using.... Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 25, 2018 Report Share Posted April 25, 2018 @retird Nothing at all , just like the pic i showed it to you now Link to comment Share on other sites More sharing options...
iambyrdman Posted April 25, 2018 Author Report Share Posted April 25, 2018 On 4/25/2018 at 12:10 AM, retird said: @iambyrdman....... What-a coil...... so it works on the 75C in TC mode.... now does it work in TC mode on the 250c devices also? Can we see a Screen shot of one of the 250C's vaping that atty in TC mode..? Expand OK, this is it on the 250C in 316L TC mode... The third fire is with no air at all. Looks like it hit temp and pulled back but I think it was Way over 500. It was drawing so much juice it started coming out of the air intake and that's hard to do on the Pulse 22! Thanks again!!! Link to comment Share on other sites More sharing options...
retird Posted April 25, 2018 Report Share Posted April 25, 2018 On 4/25/2018 at 12:26 AM, drmaz2000 said: @retird Nothing at all , just like the pic i showed it to you now Expand I corrected my last post.... Replay as seen on the device is telling you what Profile you are using.... does it vape now with the settings you set in Replay Profile.... what wire did you set in the profile? Link to comment Share on other sites More sharing options...
retird Posted April 25, 2018 Report Share Posted April 25, 2018 @iambyrdman....... is Support Replay checked in the profile you are using and the wire material selected? Link to comment Share on other sites More sharing options...
drmaz2000 Posted April 25, 2018 Report Share Posted April 25, 2018 @retird now it's SS316 Link to comment Share on other sites More sharing options...
Feecting Posted April 25, 2018 Report Share Posted April 25, 2018 (edited) Change the Coil material from Watt to 316L (in escribe) or whatever you are using. Edited April 25, 2018 by Feecting Link to comment Share on other sites More sharing options...
iambyrdman Posted April 25, 2018 Author Report Share Posted April 25, 2018 On 4/25/2018 at 12:32 AM, retird said: @iambyrdman....... is Support Replay checked in the profile you are using and the wire material selected? Expand Like it was sent to me, yes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now