maximumsport Posted April 23, 2018 Report Share Posted April 23, 2018 Can anyone share their OEM ecig file? I seem to restored mine and can't find the back up.... I tried emailing Think Vape... No replies yet. Thanks! Link to comment Share on other sites More sharing options...
maximumsport Posted April 24, 2018 Author Report Share Posted April 24, 2018 Just wanted to update guys, Think Vape got back to me. Got to say nice customer service! heres the Default .ecig file that comes on the device if anyone every needs it! Finder DNA 250C.ecig 4 Link to comment Share on other sites More sharing options...
DiGiTaL-CORE Posted May 23, 2018 Report Share Posted May 23, 2018 Had to reset my password just to tell you how grateful I am. Thanks, man! 1 Link to comment Share on other sites More sharing options...
maximumsport Posted May 23, 2018 Author Report Share Posted May 23, 2018 Just now, DiGiTaL-CORE said: Had to reset my password just to tell you how grateful I am. Thanks, man! No problem! Link to comment Share on other sites More sharing options...
Jetro Posted May 23, 2018 Report Share Posted May 23, 2018 Thanks for the update. I have the black & silver Finder. I really like mine. It's great to know that Think Vape has good customer service. JT 1 Link to comment Share on other sites More sharing options...
maximumsport Posted May 24, 2018 Author Report Share Posted May 24, 2018 11 hours ago, Jetro said: Thanks for the update. I have the black & silver Finder. I really like mine. It's great to know that Think Vape has good customer service. JT You're welcome. Same here my favorite mod ever! Can't put it down. Think Vape has been awesome answering emails especially Mike from Think Vape. 1 Link to comment Share on other sites More sharing options...
Brad S Ruttenberg Posted May 31, 2018 Report Share Posted May 31, 2018 (edited) does anyone know the actual mod resistence for the finder?? mine came with .004 which is generic default and i dont have a copper plug or the basic talent to build a heavy copper wire rba.. also does anyone have real case thermal settings?? not the evolve defaults that the finder seems to have ?? lastly does anyone know where i can find a good 3 s lgh g2 csv profile and what settings for cell cutoff and max and sustained input amps? id like to error on being conservative and love my finder 250c black with red... Edited May 31, 2018 by Brad S Ruttenberg Link to comment Share on other sites More sharing options...
Lops Posted June 2, 2018 Report Share Posted June 2, 2018 Am 31.5.2018 um 08:51 schrieb Brad S Ruttenberg: does anyone know the actual mod resistence for the finder?? I just took measured mine by shorting the 510 using a rta base and a low resistance wire (no regular coil wire ofc). It came out at 0.010 Ohms. Should be a reasonable estimate for it's internal resistance and also seems in line with quite a couple of other dna 250c mods. Link to comment Share on other sites More sharing options...
Brad S Ruttenberg Posted June 2, 2018 Report Share Posted June 2, 2018 4 minutes ago, Lops said: I just took measured mine by shorting the 510 using a rta base and a low resistance wire (no regular coil wire ofc). It came out at 0.010 Ohms. Should be a reasonable estimate for it's internal resistance and also seems in line with quite a couple of other dna 250c mods. I'm assuming you set the mod resistance to 0 .0 0 0. Before you ran the atomizer test??? Just wondering cuz the copper plug results I've seen have been right around .05 Link to comment Share on other sites More sharing options...
Lops Posted June 2, 2018 Report Share Posted June 2, 2018 vor 17 Minuten schrieb Brad S Ruttenberg: I'm assuming you set the mod resistance to 0 .0 0 0. Before you ran the atomizer test??? Yes I did set it to zero before testing. vor 18 Minuten schrieb Brad S Ruttenberg: Just wondering cuz the copper plug results I've seen have been right around .05 Does that mean that you found other sources regarding the internal resistance of the finder 250c? Link to comment Share on other sites More sharing options...
Jetro Posted June 2, 2018 Report Share Posted June 2, 2018 On Thursday, May 31, 2018 at 2:51 AM, Brad S Ruttenberg said: does anyone know the actual mod resistence for the finder?? mine came with .004 which is generic default and i dont have a copper plug or the basic talent to build a heavy copper wire rba.. also does anyone have real case thermal settings?? not the evolve defaults that the finder seems to have ?? My Finder 250c's mod resistance measured 0.007 ohms with the copper plug. The strange thing about the thermal settings is that my Finder tracks the room temperature within 2 degrees . But the same oe settings on my 2 Paranormals the temperature was 10 to 12 degrees off. If I can get the temperature a stable 75 degrees in the house I will do the case analyzer and post the results. Give me a couple days and I'll let y'all know. JT Link to comment Share on other sites More sharing options...
Brad S Ruttenberg Posted June 4, 2018 Report Share Posted June 4, 2018 (edited) On 6/1/2018 at 7:44 PM, Lops said: Yes I did set it to zero before testing. Does that mean that you found other sources regarding the internal resistance of the finder 250c? yeah but the thread /conversation was on a different site... and was written by folks who were not very used to english and some of the numbers didnt make sense so i suspect it might have been for the 250 not the 250c 300 w finder... so i figuired id try here where information has always been very relieable Edited June 4, 2018 by Brad S Ruttenberg clairty Link to comment Share on other sites More sharing options...
Brad S Ruttenberg Posted June 4, 2018 Report Share Posted June 4, 2018 On 6/1/2018 at 10:52 PM, Jetro said: My Finder 250c's mod resistance measured 0.007 ohms with the copper plug. The strange thing about the thermal settings is that my Finder tracks the room temperature within 2 degrees . But the same oe settings on my 2 Paranormals the temperature was 10 to 12 degrees off. If I can get the temperature a stable 75 degrees in the house I will do the case analyzer and post the results. Give me a couple days and I'll let y'all know. JT thank you thats pretty close to some numbers ive seen appearntly it can vary by +-.002 from the numbers ive seen so now ive got an idea of where to set mine.. and cool if you can get case thermals awesome thoyugh ive now got a digatl thermometer(ythank you samsung galaxy phones with an actual temp sensor that is accurate:))so worst case ill run my own case thermals in case of variance... or peculiarity of the mod... bnut i could really use a lg hg 2 .csv for 3in series as in the finder 250c... i used to have one for the wismec jaybo somewhere for the dna200 but cant find it Link to comment Share on other sites More sharing options...
Jetro Posted June 5, 2018 Report Share Posted June 5, 2018 Hey Brad, I made a new thread with the thermal settings, mod resistance and VTC5a and LG HD2 csv's. I do not use the hg2's because the builds I run on this mod draw 27 - 31 amps per battery. I killed the battery capacity of the hg2's I had in my LV Triade running similar builds. So hopefully some else can provide you with the hg2 csv you need. JT Link to comment Share on other sites More sharing options...
slash1981 Posted July 6, 2018 Report Share Posted July 6, 2018 On 6/4/2018 at 2:52 AM, Brad S Ruttenberg said: but i could really use a lg hg 2 .csv for 3in series as in the finder 250c... i used to have one for the wismec jaybo somewhere for the dna200 but cant find it See attached the curve for a triple HG2 setup. 3-LG_HG2_18650.csv Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now