nklx Posted September 22, 2017 Report Share Posted September 22, 2017 hey, yesterday i got my paranormal 75c. As I turned it on for the firt time it worked ok - after some time firing with 75w the mod showed "too hot" - I updated my escribe, newest firmware etc. and now, the mod shows me all time "check atomizer" - downgrading to other firmwares doesnt help. any solutions? Link to comment Share on other sites More sharing options...
retird Posted September 22, 2017 Report Share Posted September 22, 2017 Too Hot: The DNA 75C has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive. Firing your device at 75 watts for long period places the upper limit of the capability thus the most heat buildup. The board shuts down to protect itself from overheat. Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting. What is the coil build specifications you are firing at 75 watts? Link to comment Share on other sites More sharing options...
nklx Posted September 22, 2017 Author Report Share Posted September 22, 2017 kanthal and nichrome80 - i always fire with wattage-mode. all my atomizers work on other devices, except the paranormal, so this one has to be the problem Link to comment Share on other sites More sharing options...
retird Posted September 22, 2017 Report Share Posted September 22, 2017 You can start a ticket with Evolv if you want and they will guide you...... here is the link..... https://helpdesk.evolvapor.com/index.php?a=add&category=1 Link to comment Share on other sites More sharing options...
nklx Posted September 22, 2017 Author Report Share Posted September 22, 2017 already did ,thanks Link to comment Share on other sites More sharing options...
nklx Posted September 23, 2017 Author Report Share Posted September 23, 2017 do i have to change anything in my profile when i change my atomizer? remember, i always vape in wattage-mode. for example - one atomizer has kanthal coils, the other has ss, the other kanthal/nichrome etc... cant i just vape all in wattage mode without changing anything in the profile? Link to comment Share on other sites More sharing options...
VapingBad Posted September 24, 2017 Report Share Posted September 24, 2017 On 23/09/2017 at 7:45 AM, nklx said: do i have to change anything in my profile when i change my atomizer? remember, i always vape in wattage-mode. for example - one atomizer has kanthal coils, the other has ss, the other kanthal/nichrome etc... cant i just vape all in wattage mode without changing anything in the profile? Yes, if you turn temp limiting off (just adjust the temp above the max). Link to comment Share on other sites More sharing options...
nklx Posted September 24, 2017 Author Report Share Posted September 24, 2017 vor 8 Minuten schrieb VapingBad: Yes, if you turn temp limiting off (just adjust the temp above the max). what u mean "temp limiting" ? the option in escribe -> "support only temperature-sensing coils"? Link to comment Share on other sites More sharing options...
VapingBad Posted September 24, 2017 Report Share Posted September 24, 2017 3 minutes ago, nklx said: what u mean "temp limiting" ? the option in escribe -> "support only temperature-sensing coils"? No, just turn the temp up past max on the mod to turn temp limiting off. Link to comment Share on other sites More sharing options...
nklx Posted September 24, 2017 Author Report Share Posted September 24, 2017 i always vape in wattage mode, there is no temp?! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now