dna 200 battery cells reading to low and will not charge

[jsantana16]

I just got my new dna 200 and the thing will not charge checked on escribe and the cells are really really low cell 1 is 0.02 cell 2 is 1.44 cell 2 is 2.50 now my mod is completely dead and will not charge or go onto escribe. It has a fullymax 900 mah lipo jd tech x200

[retird]

Ship that puppy back and let the vendor address the issue.  

[jsantana16]

Tried doing that the vendor will not refund me and jd tech told me they just built the boxes not the board and this is the second unit I received from Longhorn vapor seems like I'm stuck with an expensive paper weight that I have not bin able to use not one single time.

[bmclaurin]

That is very unfortunate. You could always buy a new pack. Really sucks that you would have to do that, but the device itself is likely fine. I would not attempt to revive your existing pack, as it will likely cause the cells to become unstable.

[jsantana16]

Yea i know it does suck bad i just ordered a turnigy 950 mah lipo with a xt30 connector and see if this mod will get some life.

[blueridgedog]

Use a known "great" usb cable and try USB recover charging at least twice.  Otherwise, it looks like a classic back pack.