liv3wired Posted December 31, 2015 Author Report Posted December 31, 2015 I can't remember but does the screen come on with just USB and no battery attached? Was using it in another box with a lipo. Switched boxes, board holder and was about to solder up dual 18650 sled decided to hookup to escribe first to change to 2 cell and the screen doesn't come on. Escribe reads, uploads and downloads fine?Please help I am so frustrated I want to throw the whole thing in the trash!
VapingBad Posted January 1, 2016 Report Posted January 1, 2016 Yes the screen (and board) should come on when USB attached, and EScribe should be able to do most everything it normally can just not fire the mod at any sort of power.
liv3wired Posted January 1, 2016 Author Report Posted January 1, 2016 Board functions and escribe reads it so yeah screen is dead I suppose there are none to be had?
black lace Posted January 1, 2016 Report Posted January 1, 2016 if it looks fine, you havnt got it in stealth mode per chance?they will take a certain amount of knocks and bangs, its if you crack the ribbon or screen its as good as dead.
liv3wired Posted January 1, 2016 Author Report Posted January 1, 2016 Can stealth mode be changed via escribe? The ribbon has no kinks or cuts in it.
macz Posted January 1, 2016 Report Posted January 1, 2016 In the Screen tab check on charging brightness, if set to 0% change it to 100% or any number you want
black lace Posted January 1, 2016 Report Posted January 1, 2016 liv3wired said:Can stealth mode be changed via escribe? The ribbon has no kinks or cuts in it. not sure am on mobile but continualy pressing the fire button it would show up lock or unlocked, in stealth mode. have you built it.. or..
liv3wired Posted January 1, 2016 Author Report Posted January 1, 2016 Ok peeps tried locking and locking stealth mode in and that is not the case It was in another mod I had built working flawless 1590 A+. I took it out was in the process of building it in a G+ with dual 18650 sled. Got it all soldered up mounted to my board holder decided to hookup to escribe to switch to 2cell and thats when I noticed the screen had stopped working.I'm going to finish the build except for epoxy and see where I am at at that point.I have emailed Evolv about a replacement screen or eta on screens. At this point I may just sell what I've got and call it a day!?Thanx everyone for the help and suggestions.
black lace Posted January 1, 2016 Report Posted January 1, 2016 oh good grief,,, pulled a few dna 40 large screens for re building and become so used to murdering the screen, buying a replacement was top of the materials list before even starting, but at only a fiver a time,, none of us new they were to become as rare as rocking horse ****, I would shelve it for a while see what turns up in the new year..........in a 1590a I haven't even managed to replace a firing button or charger board without killing the screen.
liv3wired Posted January 1, 2016 Author Report Posted January 1, 2016 went ahead and soldered up battery sled the board does still work so umm yeah I'll shelve it and come back to it later
jhackking Posted January 4, 2016 Report Posted January 4, 2016 Geez http://www.cremedevape.com/epages/yxve46fvrnud.mobile/secea2213c538/?ObjectPath=/Shops/yxve46fvrnud/Categories/Just_Arrived they just got a batch of screens in but u better b quick i just ordered myself one little bit more expensive but hey ho )
liv3wired Posted January 4, 2016 Author Report Posted January 4, 2016 Appreciate it. I've already been in contact with Evolv and they're going to RMA it for me
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now