CptSmoke Posted April 11, 2016 Author Report Share Posted April 11, 2016 Getting ready to build some coils on the vaporshark DNA 200 what have the original 10 watt hrs batterie ( 900mah 3 cell) what build suggestions you guys have for longer batterie life ? Was running 22 g ni80 wire on 3mm with 6 wraps ( dual coils ) and was getting around 4 hrs batt life ( 300 puffs ). Got some 28g Ni200 and was thinking about single coil build twisted. Any suggestions? ( will go tempeture mode ) Link to comment Share on other sites More sharing options...
black lace Posted April 12, 2016 Report Share Posted April 12, 2016 I dont think you will notice a great deal of difference.. is my answere.... single or twin coiling because if your not getting your hit you will only vape it harder,doubtful that you will whant to up a level on nicotine in your juice to reduce the craving for a vape,,,to prolong a battery. And you would be compramising the quality that your enjoying at the moment, twin coiling 3mm is what 15ml of juice? In the four hours I carry a pair of,, hammond 1590a with a 950 lipo in and a kayfun rta as an all day vape / and also a gbox with 1350 lipo and aromatiser rdta also all day vape , same day, swapping and changing, both are depleated by bedtime 100ml juice a week easy. Link to comment Share on other sites More sharing options...
CptSmoke Posted April 12, 2016 Author Report Share Posted April 12, 2016 ya i guess you have point there "black lace" . I do carry extra mod with some batteries with me and ya if i make single coil i will don't get as much flavor / vapor and most likely vape more. I will just order extra 950mah lipos and just switch them when need to be. My other hobby is RC cars so i do have great balance charge what run off 12V car lighter think . I figured i will ask before i build it tonight maybe get some suggestions. Thank you for the help Link to comment Share on other sites More sharing options...
black lace Posted April 12, 2016 Report Share Posted April 12, 2016 Single strand is going to heat up faster on less power i reccon..so a twin coil setup would have moor surface area, vapour profuction ect ect waffle waffle. there is a thread on hear dated several months back with different mods and expected performance.. am on mobile and having difficulty searching it on a small screen.. Link to comment Share on other sites More sharing options...
arsacane Posted April 14, 2016 Report Share Posted April 14, 2016 I do get a pretty decent battery life using a high resistance with SS316 (0.35mm don't know what AWG is that) on single coil a tank (wotofo serpent). Of course a dual coil direct lung power monster (v.g. Griffin or similar) will certainly lead to shorter battery life. I find that SS heats up pretty quickly so I did a profile with low watts (40W) but an agressive pre-heat (punch 8 or more up to 70W for 0.5s) and when I look in the device monitor my puffs hover around 20-35 W avg. Link to comment Share on other sites More sharing options...
BillW50 Posted April 14, 2016 Report Share Posted April 14, 2016 arsacane said:I do get a pretty decent battery life using a high resistance with SS316 (0.35mm don't know what AWG is that)...27AWG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now