Guest Posted June 19, 2016 Report Share Posted June 19, 2016 Opus DNA 200 I have been using titanium since I first got my opus and been very happy I decided to try 316ss 3 builds no space glow light .space glow light space no glow . Bellow v3 24 GA 316 lighting vape wire 2.5 center 0.11 build pre heat 50 /120 punch med 1 second temperature 330 /480 .no flat line at all 2.5 second puff will get 200 degree swing once. then smaller swings up and down it's not going over the set temperature to bad but dropping I use the wire cv that I got with e scribe and tried smoke Calc cv what am I missing the same atty titanium build really nice flat line and vapor please need input thanks Link to comment Share on other sites More sharing options...
VapingBad Posted June 19, 2016 Report Share Posted June 19, 2016 Until the 200 get the update to improve ss I find the best approach is to use preheat to get to temp and set the wattage to maintain the temp just below the limit.This show that for the first half of the vape, then I let it go above the limit to show the difference. When the update comes you will get a smooth line like the DNA 75 with ss. Link to comment Share on other sites More sharing options...
Guest Posted June 19, 2016 Report Share Posted June 19, 2016 Thank you so much Vapingbad I was lost I had helped someone with a DNA 75 and it was a excellent Flatline I didn't realize the DNA 200 might be behind it I am sure it will not be too long before that is changed the titanium has me pretty spoiled so no problem waiting on up Date give me something to look forward too thank you again Link to comment Share on other sites More sharing options...
VapingBad Posted June 19, 2016 Report Share Posted June 19, 2016 You're welcome Modbusters Link to comment Share on other sites More sharing options...
meloserj Posted June 21, 2016 Report Share Posted June 21, 2016 This is exactly what I am getting! OMG, I was thinking I am the stupid one who doesn't understand ohm laws !Thanks a lot to share this photo and I will wait for update of DNA200 Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 VapingBad said:You're welcome Modbusters@vapingbad, so at quick glance your saying that SS mode is being worked on and an update will come through soon to fix? It would explain my lackluster experience the other day.. I thought I had a defective modwhen can we excpect update??????? Link to comment Share on other sites More sharing options...
VapingBad Posted June 30, 2016 Report Share Posted June 30, 2016 Jentz9517 said:@vapingbad, so at quick glance your saying that SS mode is being worked on and an update will come through soon to fix? It would explain my lackluster experience the other day.. I thought I had a defective modwhen can we excpect update??????? The update will make it a lot smoother regulation for ss, it will be coming, but I don't have a date. Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 VapingBad said:The update will make it a lot smoother regulation for ss, it will be coming, but I don't have a date.I never have had problems with SS but with 2cell 133 its a different story.. I have yet to get a decent pull off a dual 18650 set up. I must be overlooking something it seems like theres not enough current even setting to max preheat max punch it lacks authority. I know it shouldn't be that way.. does anyone else have this problem? both my vt133 and duo behave the same.. I haven't tried lipo in duo yet to see if it reacts differently or a possible connection issue but as of yet both mods do this Link to comment Share on other sites More sharing options...
VapingBad Posted June 30, 2016 Report Share Posted June 30, 2016 Jentz9517 said:I never have had problems with SS but with 2cell 133 its a different story.. I have yet to get a decent pull off a dual 18650 set up. I must be overlooking something it seems like theres not enough current even setting to max preheat max punch it lacks authority. I know it shouldn't be that way.. does anyone else have this problem? The main difference with 133 config is a 6 V output limit and if you are using high res this may limit your power a bit, what res are you using? Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 VapingBad said:The main difference with 133 config is a 6 V output limit and if you are using high res this may limit your power a bit, what res are you using? .24 ohms and then if I use titanium its fine???? Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 Or another band aid fix is to run a higher TCR with 316 Even Jaquiths v3.25 is anemic with my 2cell Link to comment Share on other sites More sharing options...
BillW50 Posted June 30, 2016 Report Share Posted June 30, 2016 Jentz9517 said: .24 ohms and then if I use titanium its fine???? Courtesy of VapingBadLooks good to me. Link to comment Share on other sites More sharing options...
VapingBad Posted June 30, 2016 Report Share Posted June 30, 2016 0.24 ohm it should not be affected by the 6 V output limit, maybe your mod resistance is set too high. Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 Ya I have fiddled with it on the duo set at 0.006 Link to comment Share on other sites More sharing options...
Jentz9517 Posted June 30, 2016 Report Share Posted June 30, 2016 It rides the line and regulates really nice but the vape is a wisp is all Link to comment Share on other sites More sharing options...
VapingBad Posted June 30, 2016 Report Share Posted June 30, 2016 That is odd, IIWY I would compare device monitor with the same build between your 200 & 133, they both have the same current limits, but if you are getting a much weaker vape on the 133 something is not right. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now