lewisss Posted October 9, 2016 Author Report Share Posted October 9, 2016 Hi,I am trying to set up our first dna250 before we start releasing them. but we cant get the production utility to work.it keeps coming up th.t we need to use a powered usb and it needs at least 0.9a charge.I have it plugged in now to the hum we do the test through and it is charging at 1.85awe have tried both sp3 and 4 and it is the same issue with boththanks Link to comment Share on other sites More sharing options...
VapingBad Posted October 9, 2016 Report Share Posted October 9, 2016 It should work, is is giving a message saying something like charge current was not above 0.899 A or something else? Short USB cables tend to allow more current and USB3 sockets will provide more than enough current, although I believe the hub set up you have should also be good. Link to comment Share on other sites More sharing options...
lewisss Posted October 9, 2016 Author Report Share Posted October 9, 2016 just tried it again with 300mm anker cable (seriously over engineered) and same resulterror readsPlease do a battery test wit a usb current of at least 0.9 AmperesUse a powered USB hub i necessarystrange thing is, if i uncheck the battery test I still get the same result Link to comment Share on other sites More sharing options...
James Posted October 9, 2016 Report Share Posted October 9, 2016 lewiss, if you go to Device Monitor and click Diagnostics, Set USB Current Limit, and set it to 1A, what does the USB current read? 1A, or does it stay at 1.8A?(You have the device set to "Wait Until USB Charge Current Goes Above": 0.9 (or higher) A, right? If it is set to 0.1, the default for DNA 200, this is the cause of the error.)I'd recommend using the SP4 Production Utility not the SP3, by the way. Its USB charging test is better. Link to comment Share on other sites More sharing options...
lewisss Posted October 9, 2016 Author Report Share Posted October 9, 2016 what a dumbarse.. it was set to wait till usb current rises to 0.1all working now thanks Link to comment Share on other sites More sharing options...
James Posted October 9, 2016 Report Share Posted October 9, 2016 When you used SP4, did it not automatically make the minimum 0.9? If not that's a bug Link to comment Share on other sites More sharing options...
lewisss Posted October 9, 2016 Author Report Share Posted October 9, 2016 no i didnt change anything. that must have been the default Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now