buggah Posted November 15, 2016 Author Report Share Posted November 15, 2016 Hello, this is a big problem or nothing really bad? Actually I was looking problem with battery percentage, it is jumping like a crazy, one time 39%, after 1 hour (sleep mode, not vaping) 50% . Link to comment Share on other sites More sharing options...
buggah Posted November 15, 2016 Author Report Share Posted November 15, 2016 now it seems okay, but what happens with battery percentage? 3.71 V and 0% haha Link to comment Share on other sites More sharing options...
Wayneo Posted November 15, 2016 Report Share Posted November 15, 2016 I take it that you have the Lipo installed? Link to comment Share on other sites More sharing options...
buggah Posted November 15, 2016 Author Report Share Posted November 15, 2016 yes guys, it is stock lipo 1300 mAh as I remember Link to comment Share on other sites More sharing options...
VapingBad Posted November 15, 2016 Report Share Posted November 15, 2016 What are your battery watt hours and soft cut-off settings?Also have a look in device monitor to see if one or more cells is sagging excessively when firing. Link to comment Share on other sites More sharing options...
Modbustersecig Posted November 16, 2016 Report Share Posted November 16, 2016 i posted this before is num cell 3 looking bad week ? it gets further off as the pack voltage goes down i razed soft cell cut off to 3.09 and still dose not seem right at cell voltage at 3.10 and below it well not even hit 290 D F coil and no message check battery i am trying to figure out soft cell cut off problem or just poor battery pack thanks for looking DNA250 Link to comment Share on other sites More sharing options...
buggah Posted November 16, 2016 Author Report Share Posted November 16, 2016 VapingBad it is 1300, 14.43 Wh, cutoff is 3.20. today I got check battery when I tried to burn fire single coil (only at 12w) connected device to escribe and I saw my Cell 3 is 3.40 V (as I remember) and cell 2, 1 was 3.21 V. Device is really new, charged maximum 20 times. Link to comment Share on other sites More sharing options...
VapingBad Posted November 16, 2016 Report Share Posted November 16, 2016 3.2 V is very high, it will cause battery warnings when any 1 cell reaches that under load, for LiPos the default is 3.09 and you can go below 3 with 18650s. It may also be that cell 3 is weaker than the others. Link to comment Share on other sites More sharing options...
buggah Posted November 16, 2016 Author Report Share Posted November 16, 2016 okay will make 3.09, yesterday I had this problem but after few minutes my it was okay , maybe I had to try full charge it? when I saw it is same Volts I just removed the usb. what I have to do now? By the way, percentages is jumping againI dont know it is battery problem or something wrong with my escribe. Tried reset it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now