Jump to content

Discharge Profile for 1x18650/26650


sunduk

Recommended Posts

Mustafa, on your battery tab you'll see Battery analyzer. Start with close to fully charged batteries. Create about a .5 ohm coil. Best to use 4 or so tennis ball sized loops of wire. Start the test, at 40 watts. In less than an hour, the testing will finish. You then need to save and load. Dead easy, and the absolute most accurate values for your mod and your batteries. Cheers.

Link to comment
Share on other sites

  • 4 months later...
  • 1 month later...
On 2/7/2017 at 3:16 AM, Adri said:

For which type of AWT 26650 is the battery curve?
AWT Yellow 4500 mah 75A or another type?

I find it strange that the curve claims the battery is at 0% fully empty when reaching 3.54 volts.
Normally I would expect there to be at least 35% to 40% charge left at that voltage level.
 

do you have AWT 26650 4500mah 75A battery profile....... can you provide me one with cell cutoff please 

Link to comment
Share on other sites

On 12/25/2016 at 8:57 AM, sunduk said:

#Vape2All

Here my profiles and others from forum:

Enook Red 26650 5500 60A (15150Wh)
Basen Black 26650
AWT IMR 26650
Ijoy 26650 4200

Samsung25R
Samsung30Q  (10350Wh)
SonyVTC5  (8100Wh)
SonyVTC5A  (8220Wh)

 

1xSony_VTC5A_Battery_Curve_(8.228).csv

1xSony_VTC5_Battery_Curve_(8.100).csv

1xSamsung30Q_10354.csv

1xSamsung25R.csv

1xIjoy4200.csv

1xAWT_IMR_26650.csv

1xBasen26650.csv

1x26650enook_15150.csv

whats the cell cutoff for awt imr 26650 battery

Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...