I have given up on the Lost Vape Therion BF in temp control mode

[Little Brat]

Please don't ask to see graphs. I have spent 3 days with a total of 26 hours reading every post on this issue. I have done the atomizer, mod temp and battery calibration twice and every time I load my profile, the wattage will not adjust for the temperature. I have totally given up on this mod. I have the Drone (250 chipset) and no issues with temp mode. I have a BF Odis 16 atomizer that was bought specifically for this mod which needs temp mode to avoid dry hits as there is virtually no juice well. I am not a happy camper with this DNA 75 chipset

[giz_60]

Sorry to hear you are having issues but, you obviously don't have something set up correctly. What do you mean when you say the "wattage will not adjust for the temperature"? Not being able to see your mod, you are going to need to post some screenshots if you need help. The 75 works very well in temp mode, if everything is set up properly...

[Little Brat]

 

[Little Brat]

 

[Little Brat]

 

[Little Brat]

I honestly think my chip is defective. I love Lost Vape products

[giz_60]

Little Brat said:

 

Is this the wire profile you are using for Profile 1?

[giz_60]

Can you post a screen shot of Device Monitor while firing with the following boxes checked...Power, Power Set, Temperature, Temperature Set, Cold Ohms, Live Ohms...

[Little Brat]

it does not read the coil temp at all

 

[Spirometry]

That material profile needs to be renamed NI200

[Little Brat]

works perfectly on the Drone

[giz_60]

As @Spirometry stated, that is the wire profile for Nickel...not SS

[giz_60]

Try changing the wire type in Profile 1 to the SS316 wire profile...the is the Evolv default & see what happens

[retird]

You might compare my SS316L material profile to the profile you posted.... they are quite different.... guess you made that profile????

 

[Little Brat]

okay I see the temp now by setting it to Ni200 but it is way off from actual temp  

[giz_60]

Are you using nickel?

[giz_60]

And, can you post a screen shot of the complete Device Monitor?

[Little Brat]

no got it off steam engine

[Little Brat]

no ss 316L

[retird]

What wire is in the atty   Ni200 or SS316L?  

[Little Brat]

 

[giz_60]

If you are using SS316L, then it's not going to work correctly if you set it for nickel..

[Little Brat]

 

[Little Brat]

way too hot..burning my lips off

[giz_60]

Can you post the Profile again...and please, the Complete Device Monitor...the whole screen!