FerdinandMac Posted February 6, 2017 Author Report Share Posted February 6, 2017 Hello! I have some problems with the vtc5 on my Triade. If there's no one csv file charged 3 VTC5? Thank you very much! Link to comment Share on other sites More sharing options...
keyfadam Posted March 23, 2017 Report Share Posted March 23, 2017 i would love to have 3 vtc5 profile for triade250 too. thanks in advance.btw i am currently using this and it seems to be close to accurate for now. this is from some other device, not sure if it is ok to use that way though.my capacity is at 28,86soft cutoff is at 2.86"Battery Charge (%)","Cell Voltage (V)"0,2.86999511718750.764122068881989,3.009994506835942.14553499221802,3.139999389648443.12241244316101,3.199996948242195.66648960113525,3.2700042724609417.8894462585449,3.4199981689453145.2599983215332,3.6100006103515689.0636749267578,4.0299987792968892.7164764404297,4.0500030517578198.1851959228516,4.1199951171875100.001098632813,4.19000244140625and thanks to giz_60it is now"Battery Charge (%)","Cell Voltage (V)"0,3.009999990463262.56157636642456,3.1099998950958310.0390691757202,3.3299999237060517.5199604034424,3.4700000286102331.7071533203125,3.6199998855590853.4024124145508,3.819999933242865.242057800293,3.9000000953674380.2480010986328,4.0599999427795492.4953308105469,4.110000133514498.4202499389648,4.15999984741211100,4.21000003814697 Link to comment Share on other sites More sharing options...
Madkat Posted March 28, 2017 Report Share Posted March 28, 2017 sorry for the silly question...but where do you load the battery profile in eScribe? i must be blind! Link to comment Share on other sites More sharing options...
giz_60 Posted March 28, 2017 Report Share Posted March 28, 2017 In the 'Mod' tab... Link to comment Share on other sites More sharing options...
Franz74 Posted March 28, 2017 Report Share Posted March 28, 2017 In the attachment there's my discharge curve. Hope you'll find it useful3 x vtc5.csv Link to comment Share on other sites More sharing options...
Madkat Posted March 29, 2017 Report Share Posted March 29, 2017 giz_60 said:In the 'Mod' tab... Thank you SiFu giz_60just realized i've been running escribe UI in advanced mode only :/ Link to comment Share on other sites More sharing options...
keyfadam Posted March 29, 2017 Report Share Posted March 29, 2017 yeah giz_60 is the man ! Link to comment Share on other sites More sharing options...
FerdinandMac Posted April 9, 2017 Author Report Share Posted April 9, 2017 Thank you!!!!! Link to comment Share on other sites More sharing options...
FerdinandMac Posted April 18, 2017 Author Report Share Posted April 18, 2017 Hello! Another question. When charging below 20%, the Triade produces 70-80 watts. After a while, the battery indicator starts blinking! Why not appear "Check Battery" and ''Weak Battery''? Link to comment Share on other sites More sharing options...
giz_60 Posted April 18, 2017 Report Share Posted April 18, 2017 The blinking battery indicator is the 'Weak Battery' message... Link to comment Share on other sites More sharing options...
Franz74 Posted April 18, 2017 Report Share Posted April 18, 2017 giz_60 said:The blinking battery indicator is the 'Weak Battery' message... Correct . Link to comment Share on other sites More sharing options...
giz_60 Posted April 18, 2017 Report Share Posted April 18, 2017 In the past, there was a 'Weak Battery' message, but Evolv changed it to the blinking battery indicator so as not to be so annoying...the 'Check Battery' message will appear if there is a problem with a cell, usually low voltage... Link to comment Share on other sites More sharing options...
FerdinandMac Posted April 18, 2017 Author Report Share Posted April 18, 2017 Many thanks for the answer !!! Link to comment Share on other sites More sharing options...
giz_60 Posted April 18, 2017 Report Share Posted April 18, 2017 Link to comment Share on other sites More sharing options...
funnfunn Posted May 4, 2017 Report Share Posted May 4, 2017 Hellogiz_60 said:In the 'Mod' tab... Why only 9 Wh?You need to consider the total voltage of the three batteries.The nominal voltage of a single battery VTC5 3.6 volt hence the nominal voltage of the three batteries is equal to 10.8 volts. You need to specify the total nominal voltage of three batterieshere are my settingsTriade DNA250 3xVTC5(my conf.).csv Link to comment Share on other sites More sharing options...
giz_60 Posted May 4, 2017 Report Share Posted May 4, 2017 That screenshot was taken from the Evolv default setting...wasn't referring to the Wh's in that post...but rather, how to load a .csv file... Link to comment Share on other sites More sharing options...
funnfunn Posted May 4, 2017 Report Share Posted May 4, 2017 giz_60 said:That screenshot was taken from the Evolv default setting...wasn't referring to the Wh's in that post...but rather, how to load a .csv file...this is the standard chart from the default settings for Triade DNA250I changed the numbers in the calculator battery.You mean to load the settings in the mod? And upload the file which you downloaded earlier Then save the settings in a modThat's all. Mod is ready to work. Link to comment Share on other sites More sharing options...
giz_60 Posted May 4, 2017 Report Share Posted May 4, 2017 If you open Escribe to the DNA 250 version with no device attached...this is the screen you will get...which is what was used in the screen shot you were originally referring to...was only using this as an example to show how to load a .csv file into his device... Link to comment Share on other sites More sharing options...
funnfunn Posted May 4, 2017 Report Share Posted May 4, 2017 giz_60 said:If you open Escribe to the DNA 250 version with no device attached...this is the screen you will get...which is what was used in the screen shot you were originally referring to...was only using this as an example to show how to load a .csv file into his device...Well friend, no problem. I hope these tips will help novice users. Thank you for your file (.csv) I'll upload it into my mod later. Link to comment Share on other sites More sharing options...
giz_60 Posted May 4, 2017 Report Share Posted May 4, 2017 Link to comment Share on other sites More sharing options...
Lanzarotechris Posted October 17, 2018 Report Share Posted October 17, 2018 Maybe a stupid question, not shure... Can I use this csv file on my Triade DNA250C as well ? Would there be a difference between DNA250 and DNA250C ? My gutt says "no... its the batteries, stupid !" But as I said, not 100% shure... so when in doubt, better ask, right ? Link to comment Share on other sites More sharing options...
chinaski Posted October 17, 2018 Report Share Posted October 17, 2018 36 minuti fa, Lanzarotechris ha scritto: Maybe a stupid question, not shure... Can I use this csv file on my Triade DNA250C as well ? Would there be a difference between DNA250 and DNA250C ? My gutt says "no... its the batteries, stupid !" But as I said, not 100% shure... so when in doubt, better ask, right ? Trust your gutt! You can use it 100% 1 Link to comment Share on other sites More sharing options...
Lanzarotechris Posted October 17, 2018 Report Share Posted October 17, 2018 (edited) Thanks,... I always can rely on my gutt,... good to know 😉 ...and congrats to your 1st post *hehe* Me myself started today as well... guess that makes us the newbies... Welcome ! (still try to work things out... for example where can I edit my signature for my posts ?) grazie ;- Edited October 17, 2018 by Lanzarotechris added italian Link to comment Share on other sites More sharing options...
chinaski Posted October 17, 2018 Report Share Posted October 17, 2018 In questo momento, Lanzarotechris ha scritto: Thanks,... I always can rely on my gutt,... good to know 😉 ...and congrats to your 1st post *hehe* Me myself started today as well... guess that makes us the newbies... Welcome ! (still try to work things out... for example where can I edit my signature for my posts ?) I'm not used to post in the forum, but i can assure you i've been using dna boards almost a couple years now. So you can trust your gutt (and me aswell ;-) ) Link to comment Share on other sites More sharing options...
Lanzarotechris Posted October 17, 2018 Report Share Posted October 17, 2018 my gutt and your approval is proof enough for me... 👍 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now