rcamarda

@Wayneo @dwcraig1 Hi gents, any update on the topic? Stil100c can't be calibrated? Thanks for any update.

Hi, do DNAc boxes read resistance values even in standby? If yes, why?

Yes, I got the Dani just for a ohm read, so I did not do the init process. Thanks for all the details and I will update this thread as I got more DNA mods.

I tried different atoms: by-ka v8, sputnik, vapor giant M5, Eliteism and Iago by telli's mod. I do confirm DNA behaviour. Coils are read +0.04 on the Odin mini and +0.03 on the VTBox 250c. Aegis solo reads +0.01 and dani mini reads +0.01.

Here you are the cvs file of one of the analysis. Analisi_termica25042022.csv

I've an update on this topic. I went through a Case Analysis with a 75c and during the cooldown processes the amp on USB were solid 0. So i think this is a bug on the 250c or the process is different for the two boards and one has the possibility to set the USB recharge to 0 (75c), during Thermal Analysi, and one has not (250c) and they accounted this in the analysis calculation.

Here the two boxes:

Here i am. Had to find the time to do some tests. The Odin Mini 75c reads 0,040. The VTBox 250c reads 0.038. Before testing with the screwdriver i did set the internal resistence to 0. Apart from the screwdriver test, since you mentioned the wire I'm using is a suprema ratio ss316 28GA wire.

Thanks, i'll go through it. Can you please point out where i did question the truthfulness of someone because i can't find it and i do pay attention to be polite.

I will reset to defaults to get the NiFe30. I would just point out that Evolv would resolve the problem letting the user to set the TCR within the mod menus. I'm sure this has been asked/requested in the past multiple time. It's not a strange feature, it's quite common on every mod. I don't think suggesting would make any difference. I'm happy for Evolv that the Evolv's Director of support dealt with me. I don't remember to question the truthfulness of anyone here (please be more specific, maybe you confuse me with someone else).

I did try almost everything and searched a lot. I posted here because i did finish ideas!

I did all procedures before. I should have written it since the beginning.

I did try and the ohm are stable even moving the atom around to check if there is some contact issue. I did set internal resistence with a dedicated 510 shorting tool. And I've updated everything to both boxes.

Hi, i've some problems with two DNA mods (VTBox 250 and Odin Mini). I've a By-Ka v8 builded with 7 wraps of 28GA on 2.5 of SS316, legs in opposite directions. The steam-engine ohm value is 0.706. I tried on 3 non DNA boxes and they read one 0.73 (le petite box by vaponaute) and two 0.72 (aegis solo and dani mini). That's ok as precision and atom could affect the reading. On both DNA mods i get a 0.775 value which is quite away from what i do expect from a DNA. Any suggestion?

I did already know how to change it through escribe. Thanks in any case for the time you took to answer