Vapors Tongue

I'm thinking of buying the new batch of Hussar Lore with the DNA60C chip but it says no usb port on the description. so how do you connect it to escribe if that's the case. ive watched a few reviews and none mention escribe at all and the regular DNA60 version doesn't mention escribe. by looking at the non DNA and the colour DNA body types don't seem to have a port on them. so do you think that you need to dismantle it every time you want to update setting via escribe or is there no usb port at all on the board its self. thanks

well , i bought another 80C to rule out if i had a faulty pin and 2 new RBA'S and my custom threaded drip tips work no problems. as soon as i reverted back to the RBA'S i had originally same problems i had returned. so if you cant get replay to work with an RBA try a flushnut for a better connection.

if anyone reads this in the future the solution is simple but rather annoying , you have to use a flush nut to get that much downforce to make replay work . drip tips of the screw in kind wont work or be 100% what the pin needs for contact between the boro tank and device.

UPDATE ! . i had a brain fart and i completely forgot the SAN AIO came with the stock coil option shift boro tank and im pleased to say REPLAY is working just fine. so thank god its not the mod i don't need to RMA it and we can now say the Voltrove RBA and the Meson RBA do not work with replay on the DNA80C. Happy days now !!!

only way to check my RBA''s i do have is to buy another and hope im not that unlucky to have bought 2 devices randomly with the same fault .. lol. so if the new one acts the same it must be the RBA and not the device

unfortunately not I'm having a clear out and I've sold any other RBA i did have. but I've a billet box and in the DNA60 they both work in temp mode and the same coils work with replay in my 250C. this is happening on the SAN AIO DNA80C

top screen replay not set , bottom screen replay set . nothing but fresh air and the atomizer error message

i set it to 5 probably experimenting , i think its set at 1 as standard as the advice on allowing compatibility with allow on unlikely coils

i can only see live ohms when replay isn't set. as soon as set reply after the first puff , the live ohm's show but briefly disappears as it says check atomizer so unable to capture

also a pic of the atomizer analyzer

followed your instructions and here are the results. the rba is a voltrove , it also happed in the stream crave meson boro tank . same results

ok will do , the place i bought it from have sold out of the colour i have so that's probably going to be a hassle as id want the same colour back .. lol i was going to buy another anyway before i noticed this , it happened from the very first day but i was using just normal kanthal wire and i thought i will try again with SS coils in it to make sure and it did it again. why I'm here now. might have a word with Vaperz Cloud see if they will swap it even though i didn't buy it direct form them. then if that fails i will open a ticket but i will know for sure if i buy another in the meantime. thanks anyway

posting 2 pics here one labeled wattage and the other replay when its supposed to be firing in replay mode but i get check atomiser message and i get nothing

everything is working up to the bottom photo you have shown, when i press fire again i get check atomizer constant , let go of the fire button it say ready again. i have to move the select click the replay icon and disable and it fires back into wattage. I've hard rebooted the device , applied the service pack , restored defaults , changed themes and it acts the same no matter what i do

Have i found a bug ? Cant seem to get replay to work at all , i get the ready text when i enable it nothing , disable replay i get wattage again. I'm using SS fused Clapton's and before that i had fused Clapton wire in it. any suggestions.

seem so , just limits it for me , id of preferred something like the DNA75C and customise anything i wanted without being tired to one colour. sure change the icons and then use the colours tab to set them a colour you want. that means you cant have a green replay icon and a red setting icon. plus you cant set the ohms txt a different size to the rest of the menu. i hope the developers add more functionality in the future

i figured it out i think , ok the picture set is for black and white files only , no colour if your going to change the image to say a different settings icon. then if you want the settings icon blue you go to the next tabs colour and pick blue but it changes all the picture images blue. you cant just upload a setting icon that is blue or a green replay icon. its all controlled by the colour tab

that's just the thing , that display tab you can change setting icon etc. but the new image doesn't does not show up when loading settings back to the device under pictures tab

I'm here for the same thing , just bought a SAN AIO DNA80C - it connects to escribe no problems but it wont open in theme designer. it doesn't even register the device is plugged in, so theme designer wont load. I've also notice you can change the graphics like settings symbol and replay symbol and so on. but when i do change them from escribe they don't alter at all. accept the graphics they are suppose to replace degrade a little. I've checked file property and bit depth and that seems to be like the original set of symbols. it appears that theming isn't available as of yet

well having a chat with Vaperz Cloud who was very helpful and the guy from SV, all i can put this down to a gremlin in the software. i opened up 2 escribes and my DNA without issue copied over to the escribe setting to the HOG that fired on its own for some reason and all that was different was temp was Fahrenheit instead of Celsius and ever since then I've had no issues with the HOG. whether someone can make sense out of that because i cant.

i think the original theme is broken , somebodies has not checked it when doing the theme for it.

i have another bit to add , its definitely wired up wrongly because I've just changed the batteries and without noticing i put 3 batteries in facing positive up and one positive down by mistake , shut the door and it powered up saying 3% battery life and i thought I've only just charged these and had another look and its then i noticed 3 facing positive it shouldn't powered up at all. anyway put them the right way and i got full charge showing but no auto fire this time. so Mr vaperz cloud has soldered it wrongly somehow. but im using it at the moment and it doesn't have issue being used its just when i come to change the batteries.

thanks for the info but i use my own custom theme on it , so i know the ins and the outs of what everything i have does on the device and session mode is disabled. i don't see the point in it myself. you have to hit the power button to operate it anyway another 3 to 4 seconds is hardly worth letting my finger go .. lol. now if it was auto draw that would be a different story.

thank you , I've basically copied and pasted what i said here , I'm not looking to pay for a repair as i feel i shouldn't have to with what vaprez cloud seemed to have created this problem ever since it went for a spring fitted then off to Canada. back again because the 510 wire came off and its firing on its own 8 out of 10 times when i change the batteries. all i can do is see what they say and probably get them to look at it. if they can do it under a warranty, or its going to have to go back to vaperz cloud again.

I'm the proud owner of a Vaperz Could DNA400C which i bought new in January 2023 round about May last year i noticed my DNA wasn't charging via USB. even though i don't charge any of my devices by usb i wanted it repaired. i sent it off to vaperz cloud knowing it was an easy fix because the spring had just gone making connection to the bottom of the battery door. this was creating the issue, vaperz cloud informed me that also there was something wrong with the board itself and they would have to send it to Evolve in Canada ( i live in the UK) for a new board, this took 5 months round trip. i got it back the second week in November and after about 2 weeks of use it refused to fire. sent it again away to vaperz cloud where he found out that the wire to the positive pin had come off and he would have to solder it back on. ive been using it again for 2 weeks and more or less 8 times out of 10 when i change the batteries if auto fires by itself and i have to take the battery door off to stop it from firring, i put the battery door back on and it fine again. should i be worried ? i really don't want to send it back again, since i bought it I've hardly used it.