Rob_H

Beautiful I have never seen one of those.

I am new too and curious for an answer for this. I got my battery set up so far and that is it just vaping away for now, not sure what to do next.

One more question if you do not mind. I just seen this image on another thread and it looks like I could wire it up like this including the jumper that is highlighted onto this pic. http://i.imgur.com/PRHDDuM.png And the long yellow lead is going between the two cells is that correct?

Alright thank you.

I think this thread covers my question just want to make for sure. I am doing a 200 in a 1550P and plan on using a 1300mah lipo as it is a Plus size enclosure. In case that the pack will not fit my back up plan will be two HG2's in soldered to together in series. I reads in this thread that I will have to put a jumper between pin 2 and 3 on the balance socket for the charger to operate properly in a 2s config. Is this correct and is there anything else to be done to run a 133 charged internally. Thanks.

So I have two Hana One mods dna40's. One is two months old and the other I got yesterday. The new one has the screen problem. Not all the time but enough to where I notice it. It seems to happen when you first fire it and the preheat goes from around 8-19-40 approx in between 19-40 it does it. Those numbers are only for a range difference as its different every time. One time the whole screen scrambled but most of the time its the ohm reading and the W after the wattage number. I found it kinda funny and it I dont care as long as it is intermittent and does not effect how it is working.