baher

I felt the same bro that i didn’t buy that extra warranty from them, they are the worst customer service to deal with. Anyway wishing you luck with that small operation 😂. Greetings from Egypt 😍

1st you have unscrew the 3 screws then take out the battery connectors from their place and u will find the board coming out. those hooks are the screen holder hooks to attach it to the board. Don't worry after taking out the battery connectors and the screws it will be so easy .

New screen of course, the old one is damaged this way so you have to buy a new one and replace it, the first bending will be just above the connection point to the chip towards the bottom part then bend it again facing up then the last one just above the screen holder. Do it with care and the results will please you. I will try to draw how it should be and post it here for you. 🤓

Hmmmm 4/10 just notice the place and how it was assembled while disassembling every part. I usually put the upper part screws together and the bottom part screws together just to avoid being confused while assembling it back. And yes take care after placing the new screen when you are putting the parts together to cut the ribbon. Do not do it on rush 🤓. Wish you good luck bro.

Thank god i have found a solution to this problem, all what you have to do is to bend the ribbon cable once under the screen holder then again before placing the screen on its place, that way you will shorten the ribbon and it will not be in contact with the fire button. 😎😎

Hello guys it happened once again, now the total count is 4 screen gone white (2 on paranormal and 2 on rebel) i need to fix this probelm as i’m afraid to buy new screen and facing same shit again 🤓

Their customer service is deep shit, i allready sent them and they did not reply although i had the same issue while buying the mod from them, the customer service at their side is below zero

Yes but how to reposition it on rebel mod ?!

hello everyone i wrote before about the screen problem with my paranormal as i have lost couple of screens till now, i bought a rebel mod dna250C 21700/20700 and i had the same problem, the screen started to shudder then it faded out and it only works while pressing the fire button (not on stealth mode) then it started to work again but as a white screen nothing appears on it, i sent rebel and esauce about my problem but the customer service their sucks they never replied and that is the usual action from them , i had another new screen so i replaced it and till now it is working fine but i hope it will continue, i guess evolv should try to find out what is happening with their screens have a nice day guys

this happened to me last august, it went all white, i replaced the screen on the 2nd half of October with a new one and guess what??!! the same happened again 3 weeks ago.. i guess there is a problem with the wiring of the paranormal as there are many cases like this among my friends. :(

Did u do anything or this just happens out of nowhere ?!

I have the same issue with my mod, it started with one line but now they are 4 lines and i really don’t know what the hell is this, i have been using it since 4 weeks